Free PDF Manual Guide

NSTALLING THE WHEEL
Fixing the wheel in place
1. Place the wheel on a table or other flat surface.
2. Place the clamp screw (16) in the table clamp (15) and then screw the clamping unit into the hole on the underside of the wheel until firmly fixed in place. Do not turn the screw too tightly, as [...]

The title ‘Grand Prix’ has associations extending back to the very earliest days of competition and the French form of the words stems from their first use in association with the French Grand Prix. Although at least one earlier event was given the name “Australian Grand Prix”, the premier Australian race was first recognised in [...]

In this article, you will learn how the camshaft affects engine performance. We’ve got some great animations that show you how different engine layouts, like single overhead cam (SOHC) and double overhead cam (DOHC), really work. And then we’ll go over a few of the neat ways that some cars adjust the camshaft so that [...]

A time traveler from 50 years ago would find today’s Formula 1 cars radically different, but would be equally surprised at the relative lack of change in engine technology. Turbochargers have come and gone and there hasn’t been a switch to two-stroke or rotary, scotch yoke engines – let alone to gas turbines or something [...]

This “how to” assumes you have some basic tools, and safety gear. Safety glasses should be worn at all times when working with tools and automotive fluids. Always use a hydraulic jack and safety stands when lifting or getting under a vehicle. If you are unsure on where to safety lift your vehicle, refer to [...]

The HALTECH E11 is a powerful “real-time” programmable fuel injection system computer designed for those seeking optimum performance. With the large number of outputs available for controlling ignition and fuel, the E11 is well equipped to run engines with sequential fuel and modern multi-coil ignition systems.

If a lateral tire force is acting on the wheel, a braking or accelerating force (tangential tire force) can only build up in a longitudinal direction up to the maximum total force (resulting force on surface). When this is reached, the wheel locks or spins. Conversely, only a limited lateral cornering force (lateral tire force) [...]

How to determine what type of brake calipers and ABS sytem is fitted. During development of the cruise control for the R1150GS we have been aware that there are two different types of front brake caliper and two different ABS systems fitted to this model, and some bikes without ABS. In order to supply the [...]

This guide focuses on the standard installation of an SMT6 unit. For help with non-standard tuning applications, such as the turbo nitrous control, please refer to the Application Notes. Application Notes can be found under the “Downloads” section on our website www.perfectpower.com.

• Place the bike on the center stand and remove the current shock absorber.
• Place the Hyperpro shock in the bike, type 461 with reservoir as shown in the picture. If your shock is equipped with the optional hydraulic preload adjuster place the banjo bolt of the HPA to the right side of the bike.