Audi S4 SMIC Installation
Jun.15, 2008 in
Audi, Automotive
Lift the car and secure it with jack stands. Ramps will also work. Remove lower engine splash shield
Remove side grilles from bumper. Use a slotted screwdriver through the grille inserts and pry the two tabs behind the inner most edge of each of the inserts.
Remove 3 bolts securing each headlight in place. Use caution when removing bolt behind the turn signal bulbs, as they are hard to retrieve if dropped.
Disconnect headlight plug. From the turn signal end, pull the headlight forward slightly, and then slide outwards to remove from inner locating dowel.

Leave a Reply
You must be logged in to post a comment.