Front door trim, removing and installing
1 – Door trim
Remove screw cap – 5 -
Remove screw – 4 – (1x).
Unclip inner and outer connecting pieces. .
Lift door trim about 20 cm upward and remove from door.
Detach release cable for interior door handle
Disconnect electrical connectors
Clip locators – 3 – (7x) must be clipped in place when installing door trim.
2 – Sleeve
3 – Clip locators
4 – Screw Tightening torque 7.5 Nm
5 – Screw cap
Detaching release cable
Pull release cable – 1 – out of guide – 2 – and detach.
Note: When installing, make sure hook – 3 – is facing upward.

Download