This program is designed for programming BMW key transponders and the compatible Philips PCF 7930/31/35 transponders.
1. System requirements
- Platform type:
PC with an RS232 COM port;
- Processor:
500 MHz at least;
- Display:
800×600 pxl at least (1024×768 prefered);
- Operating system Windows 98, 98SE, 98ME, 2000, XP;
- Space on hard drive 10MB;
2. Starting up
- Install the software
- Connect the programmer to the COM port and power it up
- Start the software

3. Buttons and controls description
1. Connect – Establishes connection to the programmer;
2. Device select – Select which type of transponder to work with;
3. Load dump – Loads binary data from previously recorded file;
4. Save dump – Saves current binary data to file;
5. Enter password – Lets you enter a password to write-access password protected chips. The current password is displayed right under this button. The default value on startup is ‘00000000000000”. More about password protection you can read in the chip description;

Download