Free PDF Manual Guide

This part is street legal in all 50 states for use on 1996-2001 Honda Acura Integra Type R vehicles.
1. Please read through the entire instruction sheet to familiarize yourself with the installation before you begin.
2. Start the engine and check for loose connections or coolant/vacuum leaks, etc.
3. Disconnect the negative battery terminal.
4. Remove the air [...]

This unit is designed for applications in a wide variety of HONDA and ACURA vehicles across many years and models. Advanced features including on-screen text, steering wheel, radio and touch screen control of your iPOD. The IPOD LOCKPICK will operate in XM capable HONDA or ACURA radios (button labeled XM present) without the loss of [...]

Based on the fixed volume 815 micropipette, the Acura® manual 810 is a double volume instrument using polypropylene straw tips in place of regular tips. Intended for the subsequent pipetting of 1 mL and 0.1 mL of the same liquid without volume setting. It replaces graduated glass pipettes when performing sequential 1:10 dilutions in bacteriology [...]

Specially designed adapters are used in conjunction with Universal Anchoring System (UAS) stands and Universal Measuring System (UMS) pinchweld stands when securing vehicles with horizontal pinchwelds and vertical jack tabs in the corners of their center sections. (All Honda / Accord / Acura vehicles excluding Odessey.) These adapters allow the positioning of vertical jack tabs [...]

Subject:
i-Honda-R DICE iPod Integration Kit for Honda/Acura, Radio Interface Kit
Installation Instructions:
1. Pull vehicle into service bay and access center console.
2. Disconnect both battery terminals. These cables must be disconnected during installation to insure proper initialization of the DICE module when it is connected.
Make sure you have the vehicle’s radio security code before disconnecting the battery [...]

1. Mount the DRL Module (A)* using zip ties or an optional hardware to sway bar, or any other location away from direct heat.
2. ORANGE (thick) – connect to 1 of the 2 battery terminals located in the under-hood fuse box, as indicated by (B). Be careful not to touch those terminals to ground/chassis, as [...]

Remove all items from the packing tube. You should have the following before beginning:
* (2) Gas springs (RT-QL-120-10A) – Be sure to cycle them a few times before installing.
* (4) 3/16″- #1steel rivets (used on hood brackets)
* (2) ball-studs and washers
* (2) brackets used on hood frame
* Printed Color Instructions
* Gas Spring locking clips – [...]

Although this turbo system has been designed to use existing emissions controls (including catalytic converter), check local laws regarding aftermarket modification to emission controlled vehicles. Remove the turbocharger kit from its carton and inspect for any obvious physical damage. All kit components are thoroughly inspected and carefully packaged prior to shipment from the factory. If [...]

1. Verifying Hardware and Software Requirements
1.1. Minimum Hardware Requirements
To find the hardware configuration of the system, ask your system Administrator.
Pentium class microprocessor or better 128 Mbytes of RAM 20 Mbytes of free disk space on your hard drive
1.2. Minimum Software Requirements
Microsoft(R) Windows(R) XP with Service Pack 2

When choosing a mounting location remember: Leave at least 3 inches of clearance for the cable. The PhatBox should be mounted parallel or perpendicular to the floor of the car. Don’t mount near wiring or fuel lines. Leave the front of the PhatBox unobstructed for easy insertion of and removal of the cartridge. The unit [...]