Free PDF Manual Guide

This repair manual covers the 1998 through 2005 model year Passat models built on the Volkswagen B5 platform. The doityourself Passat owner will find this manual an indispensable source of detailed maintenance and repair information.

The fuse panel is located under the left side of the dash board by the driver’s knee on the Cabriolet, Fox, Jetta, Rabbit and Pickup. On the Golf and GTI models the panel is located by the driver’s right knee, under the dash panel.
NOTE: On all models, fuse specifications are listed on inside of panel [...]

Free Download User Manual Volkswagen Wiring Diagram. Explanation: 1. Relay location number, indicates location on relay panel. 2. Arrow, indicates wiring circuit is continued on the previous and/or next page. 3. Connection designation, relay control module on relay panel. Shows the individual terminals in a multi-point connector. 4. Diagram of threaded pin on relay panel, [...]

This B&M Short Shift System has been designed to work on most 1993-1998 VW 2.0L 8-valve models. It has been engineered to greatly reduce shift throw and improve shift feel. Check the parts and tools lists at the beginning of these instructions for the supplied parts and the tools required to install your B&M Short [...]

The components of the K-Jetronic fuel injection system fitted to the 1.8 litre 16V engine are as shown (see illustrations). All procedures are the same as described in Part B of this Chapter except for those given in the following Sections.
2 Idle speed – adjustment
1. Run the engine to normal operating temperature, then check that [...]

The City Jetta has undergone a revamping for 2008. The exterior look has been modified, and inside, the radio and upholstery have been changed. The steering wheel is now the same as the Jetta’s. The engine remains the same, but the automatic transmission, an option, now has six speeds rather than four. The City Jetta [...]

Prior to testing separate components or systems, it is highly recommended that all procedures listed in F – BASIC TESTING article be performed. Since many computer controlled and monitored components will change voltage and resistance valves if they malfunction, it is also recommended that connector pin check diagnosis be performed.
NOTE: Testing of individual components does [...]

The K&Nо Drycharger included with this kit must be installed on the K&Nо air filter when used with this K&Nо cold air intake system. The K&N cold air intake system a performance product that can be used safely during mild weather conditions. During harsh and inclement weather conditions, you must convert your cold air intake [...]

Installing the AEM Cold Air System
a) When installing the AEM intake, DO NOT completely tighten the hose clamps, MAF sensor assembly or the mounting tab hardware until instructed to do so later in these instructions.
b) Install the rubber mount in the outermost (towards driver’s side of vehicle) hole to the rear of the large opening [...]

This handout is provided to guide you through the steps necessary to upgrade your vehicle with one of our performance chips. Also be aware that APR is only a phone call away should you every have any questions or concerns pertaining to any APR products.
Step 1: Park Car.
Insure car is off and key is out [...]