There are five (5) main pages on the Garmin unit.
• The Satellite Page
• The Map Page
• The Pointer Page
• The Highway Page
• The Active Route Page
These pages are arranged sequentially on the unit, like on a rolodex. The Page and Quit keys are used to navigate between the pages. For example, if you are viewing the Satellite Page and you want to see the Highway Page, you can get there by pressing the Page key three times or the Quit key twice.

Unit Check Before Leaving the Office
• Before leaving the office it is important to make sure the GPS unit is working. This will save time and frustration because a problem can be found/fixed at the office before you travel to your field site
• Turn on the handheld unit and connect differential receiver to make sure they work
• Check to see the memory is cleared of waypoints/tracks
• Ensure that the batteries are charged

In the Field (Point Collection Setup)
• Connect the battery pack to the differential receiver in the backpack
• Connect the gray wires from the backpack into the handheld unit
• Set the unit to receive a differential signal (RTCM in/NMEA out)
• From the Main Menu highlight Setup and press the Enter button
• Scroll (left/right) to the Interface tab
• Highlight the Serial Data Format (Ex. Garmin)

Download