Öhlins Racing AB cannot be held responsible for any damage to the front fork kit, vehicle or injury to persons, if the instructions for fitting and maintenance are not followed exactly. Similarly, the warranty will become null and void if the instructions are not adhered to. This kit should only be installed by an authorized Öhlins dealer. The installation procedure requires certain tools. Before installing this front fork kit, please check the contents of the kit, listed below. If any part is missing, please contact your Öhlins dealer.

Preventive maintenance and regular inspection reduces the risk of functional disturbance.
Breather plug
Make sure to ventilate the front fork at regular intervals:
1. Put the motorcycle on a workstand so that the front wheel is off the ground.
2. Loosen the breather plug to release the excess pressure in the front fork. Recommended Service Intervals Every 25 hours. Make your service and maintenance according to Öhlins Work shop manual.
Disposal
Discarded Öhlins products should be handed over to an authorized Öhlins workshop or distributor for proper disposal.

Download