Thank you for purchasing the PES G2 supercharger system. We have gone to great length to engineer this system to be a true bolt-on affair. Please read the entire instruction manual thoroughly before proceeding. If there is any part of the installation procedure that you are not comfortable with, please have a professional mechanic install the system.

PLEASE NOTE:
• The photos used in this manual were taken during the installation on a 2000 A4. There will be a special “NOTE” listed when there is a variation in the installation procedure.
• New PES supplied parts will be underlined in this manual.

PRE-INSTALLATION STEPS
Prior to installing the PES G2 supercharger system there are a few steps that are recommended to make the installation as safe and easy as possible.
• Make sure that the engine is completely cool.
• The car should not have been started for at least 2 hours to minimize any residual fuel pressure. This will reduce the fuel leakage that occurs while removing the fuel injectors.
• Remove the negative battery cable from the battery terminal before and during the installation procedure.
• Please save all parts and fasteners you remove from the car during installation. The system has been engineered so that the car may be returned to its stock configuration if so desired.

Download