Free PDF Manual Guide

The New PA11-HON2Y interface connects iPod products directly to Honda/Acura audio system. Its on-board software translates the factory radios external CD Changer controls functions into commands that the iPod understands. This interface enables the iPod to provide the following benefits:
1. Direct connection of the iPod to Honda vehicle audio system for optimum sound quality
2. Two playback modes:
Hybrid mode: select songs and playlist on the iPod using the CD Changer buttons on the radio
Direct Mode: Search and select songs directly on the iPod using the clickwheel and select button on the radio.
[Read the rest of this entry...]

Steps for Pressure Operation
1. Release hose from hose reel
2. Attach wand to hose reel
3. Start Honda Engine—see following instructions
4. Depress handle on wand to release the pressurized water
5. Direct pressurized water at area to excavate—working the wand in a rotating motion
[Read the rest of this entry...]

Before you start installation
Take some engine bay pictures for later reference.
Make a special drawing of all the coolant hoses going to the different parts of the stock intake, you will need this later on. The same goes for the vacuum hoses to the different parts of the intake.
Mark the electrical connectors to the MAP sensor and TPS sensor. You will need this later on.
Drain the engine coolant.
[Read the rest of this entry...]

Why not personalise your winning motorcycle with winning accessories? From the street to the race-track, our range of Honda Genuine Accessories will enable you to fuse race-riding excitement with style and convenience. All our motorcycle accessories come with a two-year warranty.
[Read the rest of this entry...]

The Honda engine is designed to give safe and dependable service if operated according to instructions. Read and understand the Owner’s Manual before operating the engine. Failure to do so could result in personal injury or equipment damage.

- Do not start the engine without mounting it on an equipment. It is designed to give safe and dependable service only when it is mounted on an equipment. Before operating the engine, read and understand the Owner’s Manual furnished with the equipment along with this Owner’s Manual.
- Always make a pre-operation inspection (page 3) before you start the engine. You may prevent an accident or equipment damage.
[Read the rest of this entry...]

We welcome you to the Honda Powered Mini World. Thank you and Congratulations for your purchase. You can be certain that you have made a wise choice with this upgrade. This kit was designed to help put you on the right track when building your ultimate Mini. With the help of this MT-B Kit, you will be driving your Super Fast Mini soon.

Mini has been made in many variations with many subtle —tweaks“ and varying build quality over its lifetime. It is impossible to account for all these, and some will even be unique to your car. Additionally, your car is likely 15-20 years old, with all that has happened to it in that time.
[Read the rest of this entry...]

SECTION 1: PRE-INSTALLATION PRECAUTIONS:
Step 1: Remove the negative battery cable. Before removing the battery cable, verify that you have the “anti theft” radio code. It is usually located in your owner’s manual or on the side of the glove compartment. If you cannot find the radio code, take your car to your local Honda dealer so that they can retrieve the code through the Honda computer network.
SECTION 2: INJECTOR INSTALLATION
Step 2: Remove the plastic cosmetic cover from the intake manifold.
Step 3: Remove the five 12mm headed bolts/nuts that hold the plastic upper intake manifold to the aluminum lower manifold. Be careful when these two manifolds are not bolted together. Errant bolts/nuts or debris could fall into the intake manifold and cause severe engine damage. It is recommended that you cover the lower intake runners with protective tape or a shop towel.
[Read the rest of this entry...]

In order to use the Floating Pump to pump water from a dam, swimming pool or large tank into your Silvan spray equipment, simply attatch the 2 ½” BSP fitting on the 64mm lay flat hose supplied, to the 2 ½” BSP outlet of the Floating Pump. Next, either attatch the outlet end of the hose to the inlet of your spray equipment using the camlock fitting supplied, or simply place the outlet of the lay flat hose into the fill opening on the spray equipment. Place the Floating Pump into the dam, swimming pool or tank, ensuring the water is deep enough below the pump inlet to prevent mud etc from being drawn up from the bottom of the dam, swimming pool or tank and into the pump.
[Read the rest of this entry...]

Honda’s seventh generation Civic range has been expanded to include the new Civic Hybrid. The Civic range was last updated in October 2000, and the model line-up was streamlined to include two body styles, sedan and hatch, with two specification levels, GLi and Vi. The Civic Hybrid is available in sedan only, and is similar in specification to the GLi sedan. The recommended retail price is $29,990. The conventionally powered 1.7 litre Honda Civic GLi Automatic retails for $26,950.
[Read the rest of this entry...]

This interface connects an iPod directly to your Honda or ACURA audio system. lt’s on-board software translates commands from your Honda CD changer controls into commands that the iPod understands. This interface enables the iPod to take the place of a Honda CD changer and provides the following benefits:
Directs the iPod’s audio output to Honda vehicle audio system for optimal sound quality playback. Controls the iPod via vehicle’s radio and steering wheel controls. r Charges the iPod’s internal battery, and charging stops automatically at one hour after iPod is paused. iPod will go to SLEEP mode after charging
[Read the rest of this entry...]