Free PDF Manual Guide

Testing with the impulse counter should be carried out for rapid fault diagnosis. The
impulse counter output shows only existing faults, since the ACC system does not have
memory capabilities. If one or more faults are indicated, repair as necessary and repeat
the test. Be sure that fuse #7 is good, the battery voltage is between 11-14 volts and the
temperature selector wheel is set to 22°C.
1. Connect the impulse counter to the on-board diagnostic connector.
Black lead of the impulse counter to socket 1
Yellow lead of the impulse counter to socket 7
Red lead of the impulse counter to battery positive terminal.
2. Turn the ignition to the “ON” position.
The LED “U Batt” will be illuminated. If the LED “U BATT” does not illuminate,
check for voltage between socket 1 of the on-board diagnostic connector and
the positive terminal of the battery. If the voltage is not between 11-14 volts,
check for an open circuit or loose ground connection.
Test for voltage between socket 7 and socket 1 of the diagnostic connector.
The voltage should be 6 – 12 volts.
3. Depress the start button for 2 – 4 seconds.
Fault codes will be indicated by the number in the impulse counter display
window. Take note of the impulse display number.
Faults are displayed in ascending order.
The number 1 indicates that no faults are stored in memory.
During the impulse readout, The LED indicator in the fresh air/recirculation
switch will blink.
4. Repeat step 3 until all faults are indicated. After all fault codes have been
displayed, pushing the start button again for 2 – 4 seconds will repeat the fault code
readout sequence.

Source

The HONASX can either provide up to 2 auxiliary audio inputs to your Honda radio for use with any device that has RCA line level outputs, or provides 1 auxiliary audio input and allows interfacing an aftermarket CD Changer. AUX 1 is the 8 pin DIN to RCA cable which plugs into the 8 pin DIN port on the HONASX interface. AUX 2 is the set of RCAs that are wired directly to the HONASX. These audio inputs are perfectly suited for Multimedia devices such as VCRs, DVD’s, Game Systems or TV tuners. Portable music players such as MP3, MD and CD players can utilize these inputs as well.
[Read the rest of this entry...]

First of all, you have to log in to the bodybuilder information portal by entering your user name and password. This will enable you to access all the information contained in MBAS-Web and to download data on our trucks and vans.
Vehicle data:
Use this area to select a specific vehicle first. With this done, you will be offered a list of the types of information available for the selected vehicle, such as drawings, a technical datasheet, weights of optional equipment etc.
[Read the rest of this entry...]

The PA12-BMW interface connects iPod products directly to BMW audio system. Its on-board software translates the factory radios external CD Changer controls functions into commands that the iPod understands. This interface enables the iPod to take the place of a BMW external CD Changer and provides the following benefits:
1. Direct connection of the iPod to BMW vehicle audio system for optimum sound quality
2. In Hybrid mode: selectsongs and playliston the iPod using the CD Changer buttons on the radio or directly on the iPod using the iPod clickwheel In DirectMode: Search and selectsongs directly on the iPod.
[Read the rest of this entry...]

The New PA11-HON2Y interface connects iPod products directly to Honda/Acura audio system. Its on-board software translates the factory radios external CD Changer controls functions into commands that the iPod understands. This interface enables the iPod to provide the following benefits:
1. Direct connection of the iPod to Honda vehicle audio system for optimum sound quality
2. Two playback modes:
Hybrid mode: select songs and playlist on the iPod using the CD Changer buttons on the radio
Direct Mode: Search and select songs directly on the iPod using the clickwheel and select button on the radio.
[Read the rest of this entry...]

PC-A8 is a tool specially equipped for auto diagnosis, test and analysis, suitable for European, Asia and OBD-II models, which include Toyota, Honda, Mitsubishi, Nissan, Mercedes-Benz, BMW, VW/Audi, etc. This function includes fault code retrieving, data stream reading, fault code erasing, and actuator testing with accessible systems of engine control, automatic transmission, anti-lock brake system, air bag, air conditioner and cruise control.

PC-A8 is easy to operate with English menu direction, and also provide helpful information to guide the user on how to operate the equipment.
Auto Search Guide
1.Click System Set (S) under the main menu. Click COM Wizard under the pull-down menu.
2. Enter the page of Before Testing and follow the instruction.
3. Enter the page of “Search”.

Download

The Civic GX is the only vehicle certified by the EPA to meet both Federal Tier 2-Bin 2 and Inherently Low Emission Vehicle (ILEV) zero evaporative emission certification standards, earning the distinction of, “Cleanest internal combustion vehicle in the world.” Consumers in California and New York, and fleet customers nationwide, can purchase the Civic GX through qualified Honda dealers. For 2008, an auxiliary audio input jack has been added to the audio system and a new color is available, Nighthawk Black Pearl.
[Read the rest of this entry...]

Every member of the Virtex®-5 FPGA family contains a single System Monitor, which is located in the center of every die. The System Monitor function is built around a 10-bit, 200-kSPS (kilosamples per second) Analog-to-Digital Converter (ADC). When combined with a number of on-chip sensors, the ADC is used to measure FPGA physical operating parameters like on-chip power supply voltages and die temperatures. Access to external voltages is provided through a dedicated analog-input pair (VP/VN) and 16 user-selectable analog inputs, known as auxiliary analog inputs (V AUXP [15:0], V AUXN [15:0]). The external analog inputs allow the ADC to monitor the physical environment of the board or enclosure. System Monitor is fully functional on power up, and measurement data can be accessed via the JTAG port pre-configuration.
[Read the rest of this entry...]

Ordinarily, buying a used car means buying an unknown quantity. Not so when buying certified used vehicles (CUVs), which come with thoroughly refurbished components and factory-backed warranties. When dealers advertise their factory certified vehicles running “like new,” they really mean it.
[Read the rest of this entry...]

Prepare to enjoy the many pleasures of listening to a superb sound system: the Mercedes-Benz AM and FM stereo radio with cassette player. This Operation Guide is designed to give you both a quick reference of basic functions and features and a detailed description of the system’s entire range of operation. To maximize your listening satisfaction, take a few minutes to carefully review all sections of this guide.
[Read the rest of this entry...]