Free PDF Manual Guide

Getting Started
a) Make sure vehicle is parked on a level surface.
b) Set parking brake. Install rear wheel chocks.
c) If the engine has run with in the past two hours let it cool down.
d) Jack the front of the vehicle and support using properly rated jack stands.
e) Remove the left front wheel.
[Read the rest of this entry...]

This part is street legal in all 50 states for use on 1996-2001 Honda Acura Integra Type R vehicles.
1. Please read through the entire instruction sheet to familiarize yourself with the installation before you begin.
2. Start the engine and check for loose connections or coolant/vacuum leaks, etc.
3. Disconnect the negative battery terminal.
4. Remove the air filter duct, all vacuum hoses, water (coolant) hoses and electrical connectors from the stock throttle body. Mark all hoses and wires to ensure that they are installed correctly on the new throttle body.
Note: Engine coolant may run from the hoses once disconnected. Plug the end of the hose temporarily.
[Read the rest of this entry...]

1. Verifying Hardware and Software Requirements
1.1. Minimum Hardware Requirements
To find the hardware configuration of the system, ask your system Administrator.
Pentium class microprocessor or better 128 Mbytes of RAM 20 Mbytes of free disk space on your hard drive
1.2. Minimum Software Requirements
Microsoft(R) Windows(R) XP with Service Pack 2
[Read the rest of this entry...]

Read and understand these instructions BEFORE attempting to install this product.
1) Getting started
a) Make sure vehicle is parked on a level surface.
b) Set parking brake.
c) Make sure you have the anti-theft code for the radio.
d) Disconnect negative battery terminal.
e) If engine has run within the past two hours let it cool down.
[Read the rest of this entry...]

This part is street legal in all 50 states for use on 1994-2001 Acura Integra GSR 1.8L Vtec.
Throttle Body Kit Contents:
1 – Throttle body to manifold gasket
1 – Fast idle thermo valve o-ring with white stripe
1 – Fast idle thermo valve o-ring with red stripe
1 – Fast idle thermo valve o-ring with green stripe
1 – MAP sensor o-ring with blue strip
1 – E.O. # fan shroud decal
[Read the rest of this entry...]

This product is designed to be used exclusively on a Acura MDX. Acura is not responsible if the unit is used for any other intended purpose.

This Owner’s Manual should be considered a permanent part of the the vehicle. It should remain with the vehicle at all times and stay with the vehicle when sold.
[Read the rest of this entry...]

This unit is designed for applications in a wide variety of HONDA and ACURA vehicles across many years and models. Advanced features including on-screen text, steering wheel, radio and touch screen control of your iPOD. The IPOD LOCKPICK will operate in XM capable HONDA or ACURA radios (button labeled XM present) without the loss of any factory functions, even if a factory XM tuner is present. Included with your interface are licensed connectors for reliable iPOD operation and stereo AUX input jacks for connection to any other source you would like to play through your factory sound system.
[Read the rest of this entry...]

This is what we’re starting with; a bone stock engine bay. The first step is to disconnect the negative battery cable. This will help to prevent any potential electrical problems, and also will “reset” the PCM so that the computer will be able to “re-learn” the engine with the new intake in place. To disconnect the battery cable, you will need a 10mm socket or wrench. (Note that this may erase your radio station presets, so you might want to write them down first, just in case.)
[Read the rest of this entry...]

Subject:
i-Honda-R DICE iPod Integration Kit for Honda/Acura, Radio Interface Kit
Installation Instructions:
1. Pull vehicle into service bay and access center console.
2. Disconnect both battery terminals. These cables must be disconnected during installation to insure proper initialization of the DICE module when it is connected.
Make sure you have the vehicle’s radio security code before disconnecting the battery cables! Detailed steps for removing the Honda/Acura radio can be found in your factory manual this supplement will ONLY show an outline for radio removal.
3. Remove any trim that may need to be removed to gain access to the screws/bolts holding the radio in place. On some vehicles, this may require removing the trim around the shifter and removing the coin and cup holders, finally getting to the trim surrounding the radio.
[Read the rest of this entry...]

Specially designed adapters are used in conjunction with Universal Anchoring System (UAS) stands and Universal Measuring System (UMS) pinchweld stands when securing vehicles with horizontal pinchwelds and vertical jack tabs in the corners of their center sections. (All Honda / Accord / Acura vehicles excluding Odessey.) These adapters allow the positioning of vertical jack tabs into a slot on the adapter’s top surface, and the attachment of 4 inch clamps to horizontal pinch-welds.
[Read the rest of this entry...]