Free PDF Manual Guide

Thank you for purchasing the PES G2 supercharger system. We have gone to great length to engineer this system to be a true bolt-on affair. Please read the entire instruction manual thoroughly before proceeding. If there is any part of the installation procedure that you are not comfortable with, please have a professional mechanic install the system.

PLEASE NOTE:
• The photos used in this manual were taken during the installation on a 2000 A4. There will be a special “NOTE” listed when there is a variation in the installation procedure.
• New PES supplied parts will be underlined in this manual.
[Read the rest of this entry...]

DO NOT insert the Bluetooth PC adapter in an USB port until prompted by the software during application
1. Stop all running programs and insert the installation CD into the CD-ROM drive. The installation starts automatically and guides you through the installation. If the installation does not start automatically, find the SETUP.exe file on the CD and double click it to start the installation.
2. Welcome to Bluetooth® software windows, click NEXT and accept license agreement.
3. Confirm or change software destination location.
[Read the rest of this entry...]

This document is intended to help users diagnose and solve
StarMOBILE installation problems. It contains three sections:
• Installation Troubleshooting Checklist
• Common Installation Problems and Causes
• Frequently Asked Questions
If you cannot resolve your problem with the information contained in this document, help can also be obtained in the United States from the DealerCONNECT Hotline at (800) 374-4040.
[Read the rest of this entry...]

Before beginning your installation, please note the following:
• Though our products allow for user friendly installation, Supreme Legends USA recommends all installation of our product to be done by a qualified mechanic or individual.
• Some controls may require additional components not included with your kit. Some instructions may or may not be included such as installation of a brake line or brake banjo switch, minor adjustment of shift rods, or installation of a kickstand bracket on 2000 up FXST models. (extended 2” or 3” models will require longer brake lines and possibly longer shift rods)
• Please remember to use thread locking compound (we recommend Loctite blue 242) on any components which could come loose by vibration. Be certain to verify your mounting bolts, toe and foot pegs. Though we apply Loctite to some of our bolts, we DO NOT apply any to our pegs so that you may make final clocking/comfort adjustments for your particular application. DO NOT USE RED!!
• We recommend using an appropriate motorcycle lift when possible. Be certain the lift can maintain the weight of your bike without question, and be certain to secure the bike as necessary during installation of the controls.
• Be certain to dispose of all fluids properly
• BE AWARE OF WHICH TYPE OF BRAKE FLUID YOU ARE USING IN YOUR LINES. NEVER MIX DOT 4 AND DOT 5 TOGETHER. SUPREME LEGENDS USA WILL NOT BE HELD RESPONSIBLE FOR DAMAGE INCURRED TO YOUR VEHICLE DUE TO INCORRECT INSTALLATION OF PRODUCT OR USE OF INCORRECT FLUID. PLEASE CONSULT YOUR LOCAL DEALER.
• Remember that with this installation you are modifying your motorcycle, and though our controls are assembled to a “stock” comfortable fitment, there will be adjustment necessary to ensure adequate comfort for your shifting foot, as well as ensuring all shifting is occurring appropriately.

Download

This Borla Performance Cat-Back™ Exhaust System (Part number 140142) has been designed for 2004 Audi TT equipped with a 3.2L V-6 engine, all-wheel drive and automatic or manual transmissions. Borla Performance Industries recommends that an exhaust shop or professional after market parts installer, who has all the necessary equipment, tools and experienced personnel needed for proper installation, should perform the installation of this system. However, if you decide to perform the installation, we recommend someone should help you. Ensure the installer uses all under car safety precautions including eye protection.
[Read the rest of this entry...]

MAKE SURE YOU HAVE THE TOOLS AND PARTS YOU’LL NEED
These common hand tools are needed in almost every installation:
- Phillips #2 screwdriver
- Knife and blades
- Digital multimeter (DMM)
- 1/4” drive sockets are often needed for dashboard and trim disassembly.
- 3/8” drive sockets are often needed for seat removal and reinstallation.
- Check if Torx or Allen-drive bolts are used on any panels you will be removing.
- Wire cutters, strippers,and a crimping tool
- Panel-removing tools
- Marking pen or chalk, and cleaning cloths
[Read the rest of this entry...]

Bob and I appreciate your purchase of your HyperBoost Valve from Stratmosphere. Please read these instructions prior to installation so that you can enjoy a simple and quick installation of your new HyperBoost valve! –Pete
What’s included with your package:
• One HyperBoost diverter valve
• Two medium sized hose clamps
• One small hose clamp
• One instruction sheet (you are reading it)
[Read the rest of this entry...]

This document provides an outline for upgrading from the 2.5 (Limited Availability) version of SAS OpRisk Monitor to the Hotfix issued for that release. These instructions are not completely self-contained; it is also necessary to follow some of the instructions in the Configuration Guide for Monitor 2.5., as referenced in the following.
[Read the rest of this entry...]

This installation guide is intended to supplement the BMW Installation Instructions to help you with the installation of the BMW Sirius Receiver for X5 (E53) with Navigation. I opted for the Terk SIR3 Low-Profile Magnetic Mount antenna and mounted it in the spoiler. As a result, this guide will not cover the installation of the BMW Sirius Satellite Antenna and you should follow the instructions supplied with the BMW Sirius Satellite Antenna Kit if you decide to go that route. I found no signal loss or weak reception with the antenna being in the spoiler and would strongly recommend if you want to be stealth and do not like the obtrusive shape of the BMW Sirius antenna on your roof.
[Read the rest of this entry...]

Installation Procedure:
- Open trunk hatch, and pull off cover for the strut tower bolts.
- Remove the 14mm OEM nuts (requires 14mm end wrench and 5mm Allen key)
- Once removed, thread on provided nut (16mm).
- Tighten down bolt to 20lbs with 16mm End-wretch.
[Read the rest of this entry...]