Free PDF Manual Guide

This “how to” assumes you have some basic tools, and safety gear. Safety glasses should be worn at all times when working with tools and automotive fluids. Always use a hydraulic jack and safety stands when lifting or getting under a vehicle. If you are unsure on where to safety lift your vehicle, refer to its owners guide. Brake dust can contain asbestos which has been found to cause cancer. The writer of this how to assumes zero liability in how to use this guide, or any damages that may come from it to you, your property, or others and others property. If you are uncertain at any point, refer to a qualified automotive technician.
[Read the rest of this entry...]

After a three-year hiatus, the Type-S reintegrates the TL fold. For 2007, this version features a 3.5-litre V6, rather than a 3.2-litre. The engine makes 286 horsepower and can be mated to either a six-speed manual transmission or a five-speed automatic. The Type-S also comes specially equipped with exclusive wheels, front four-piston Brembo brake callipers, a firmed-up suspension, and more.
[Read the rest of this entry...]

The Trailer Emulator requires the ground and 12 volt battery line to be properly connected in order to check the electric brake circuit. 12 volt light on the emulator will be lit as soon as the emulator is connected to the tow vehicle’s plug. If this does not happen see Troubleshooting Chart. The RT, LT, TL and BU lights will light on the emulator as those functions are activated on the tow vehicle. If this does not happen see
[Read the rest of this entry...]

The filters are marked with air flow arrows The end of the filter with the arrow should face the rear of the vehicle The arrows should face downward 3 Insert the first filter into the housing and slide it over to the right Insert the second filter into the housing 4 Replace the filter cover 5 Install the glove box door.
[Read the rest of this entry...]

Before beginning your installation, please note the following:
• Though our products allow for user friendly installation, Supreme Legends USA recommends all installation of our product to be done by a qualified mechanic or individual.
• Some controls may require additional components not included with your kit. Some instructions may or may not be included such as installation of a brake line or brake banjo switch, minor adjustment of shift rods, or installation of a kickstand bracket on 2000 up FXST models. (extended 2” or 3” models will require longer brake lines and possibly longer shift rods)
• Please remember to use thread locking compound (we recommend Loctite blue 242) on any components which could come loose by vibration. Be certain to verify your mounting bolts, toe and foot pegs. Though we apply Loctite to some of our bolts, we DO NOT apply any to our pegs so that you may make final clocking/comfort adjustments for your particular application. DO NOT USE RED!!
• We recommend using an appropriate motorcycle lift when possible. Be certain the lift can maintain the weight of your bike without question, and be certain to secure the bike as necessary during installation of the controls.
• Be certain to dispose of all fluids properly
• BE AWARE OF WHICH TYPE OF BRAKE FLUID YOU ARE USING IN YOUR LINES. NEVER MIX DOT 4 AND DOT 5 TOGETHER. SUPREME LEGENDS USA WILL NOT BE HELD RESPONSIBLE FOR DAMAGE INCURRED TO YOUR VEHICLE DUE TO INCORRECT INSTALLATION OF PRODUCT OR USE OF INCORRECT FLUID. PLEASE CONSULT YOUR LOCAL DEALER.
• Remember that with this installation you are modifying your motorcycle, and though our controls are assembled to a “stock” comfortable fitment, there will be adjustment necessary to ensure adequate comfort for your shifting foot, as well as ensuring all shifting is occurring appropriately.

Download

Congratulations on your purchase of a Northland Products, Waterboy Transporter. Your Waterboy can provide years of reliable service with only minor care and maintenance. Waterboy Transporters are covered by a limited 1 year warranty. These units are not intended for transporting potable water When calling with any questions about your Waterboy, or when purchasing accessories, please have your VIN number available. This is located on the tag attached to the left of the center front frame rail.
[Read the rest of this entry...]

New Bracket installation:
- install new license plate (and frame, if any) BEFORE installing taillight on bracket
- pass wires on the wide cateye taillight through main bracket, and fasten taillight on the bracket using two bolts on the light; make sure to install the light so that clear window faces downward, toward lic. plate
- install new bracket over metal fender frame as shown; loosely fasten one side tab, press bracket over other side, and fasten the other tab, and tighten bolts evenly.
- re-install wires through clips in fender frame; make sure wiring is properly routed, to avoid interference with rear wheel, fender bolts, etc.
- re-install fender assembly; used specified Torque values (47 ft. lb; per service manual)
- reconnect rear turn signal wires (brakelight connection – see below)
[Read the rest of this entry...]

To move the shift selector lever release the shift lock The shift selector lever can be moved to N Neutral However the steering wheel will be locked unless the ignition switch is turned to the ON position This allows the vehicle to be moved if the battery is discharged To push the shift lock release complete the following procedure.
[Read the rest of this entry...]

Heater and air conditioner controls 4 2 Servicing air conditioner 4 9 Air flow charts 4 6 Alarm system See vehicle security system 2 21 Anchor point locations 1 26 Antenna 4 27 Anti lock brake warning light 2 13 Anti lock Braking System ABS 5 31 Audible reminders 2 21.

Audio system 4 10 Compact Disc CD changer 4 23 Compact disc CD player 4 18 FM AM radio with compact disc CD player 4 16 FM AM radio with compact disc CD player 4 20 Radio 4 10 Audio System Settings 4 21 Audio system Steering wheel audio control switch 4 26 Automatic Automatic power window switch 2 45 Automatic transmission position indicator light 2 17 Driving with automatic transmission 5 12 [Read the rest of this entry...]

TRW Automotive supplies the Alfa Romeo 159’s standard electronic stability control system, which automatically brakes individual wheels and adjusts throttle to prevent slides and spins. TRW’s stability control system also offers two additional features: hill-hold, a function that automatically keeps the brakes applied until the driver gives the right amount of acceleration to start on a slope without rolling backwards; and brake assist, which automatically increases the pressure applied to the brake pedal in the event of an emergency. Alfa Romeo relied upon fellow Fiat subsidiary Magneti Marelli for one of the transmissions in the new lower-premium car.
[Read the rest of this entry...]