Free PDF Manual Guide

Thank you for purchasing the Comptech Icebox Cold Air Intake for the 2002–2003 Honda Civic-Si and 2001 – 2003 Acura RSX. All components have been designed and manufactured utilizing the latest in technology and materials. Comptech recommends that you read through these instructions before starting installation and that you use an Acura Factory Shop Manual to supplement these instructions.
All Comptech products are intended to be installed by a professional installer. Always use jackstands to support the vehicle when a car lift is not available. Always work in a clean environment and use the appropriate safety equipment to avoid any potential damage or injuries.
[Read the rest of this entry...]

Thank you for purchasing the Comptech Icebox Intake kit for the Acura TSX. All components have been designed and manufactured utilizing the latest in technology and materials. Please take a moment to read this instruction manual and warranty information page thoroughly before starting any work. Remember to always use jackstands to support the vehicle when a car lift is not available. Always work in a clean environment and use the appropriate safety equipment and tools to avoid any potential damage or injuries. Comptech recommends the use of a Genuine Honda Service Manual to supplement these instructions. All Comptech products are intended to be installed by a professional installer. Many stock parts are reused during installation. Do not damage or discard any pieces during disassembly or installation. We recommend marking any hose or wire before disconnecting to avoid confusion during reassembly.
[Read the rest of this entry...]

1. Verifying Hardware and Software Requirements
1.1. Minimum Hardware Requirements
To find the hardware configuration of the system, ask your system Administrator.
Pentium class microprocessor or better 128 Mbytes of RAM 20 Mbytes of free disk space on your hard drive
1.2. Minimum Software Requirements
Microsoft(R) Windows(R) XP with Service Pack 2
[Read the rest of this entry...]

This product is designed to be used exclusively on a Acura MDX. Acura is not responsible if the unit is used for any other intended purpose.

This Owner’s Manual should be considered a permanent part of the the vehicle. It should remain with the vehicle at all times and stay with the vehicle when sold.
[Read the rest of this entry...]

This unit is designed for applications in a wide variety of HONDA and ACURA vehicles across many years and models. Advanced features including on-screen text, steering wheel, radio and touch screen control of your iPOD. The IPOD LOCKPICK will operate in XM capable HONDA or ACURA radios (button labeled XM present) without the loss of any factory functions, even if a factory XM tuner is present. Included with your interface are licensed connectors for reliable iPOD operation and stereo AUX input jacks for connection to any other source you would like to play through your factory sound system.
[Read the rest of this entry...]

Subject:
i-Honda-R DICE iPod Integration Kit for Honda/Acura, Radio Interface Kit
Installation Instructions:
1. Pull vehicle into service bay and access center console.
2. Disconnect both battery terminals. These cables must be disconnected during installation to insure proper initialization of the DICE module when it is connected.
Make sure you have the vehicle’s radio security code before disconnecting the battery cables! Detailed steps for removing the Honda/Acura radio can be found in your factory manual this supplement will ONLY show an outline for radio removal.
3. Remove any trim that may need to be removed to gain access to the screws/bolts holding the radio in place. On some vehicles, this may require removing the trim around the shifter and removing the coin and cup holders, finally getting to the trim surrounding the radio.
[Read the rest of this entry...]

Specially designed adapters are used in conjunction with Universal Anchoring System (UAS) stands and Universal Measuring System (UMS) pinchweld stands when securing vehicles with horizontal pinchwelds and vertical jack tabs in the corners of their center sections. (All Honda / Accord / Acura vehicles excluding Odessey.) These adapters allow the positioning of vertical jack tabs into a slot on the adapter’s top surface, and the attachment of 4 inch clamps to horizontal pinch-welds.
[Read the rest of this entry...]

Specially designed adapters are used in conjunction with Universal Anchoring System (UAS) stands and Universal Measuring System (UMS) pinchweld stands when securing vehicles with horizontal pinchwelds and vertical jack tabs in the corners of their center sections. (All Honda / Accord / Acura vehicles excluding Odessey.) These adapters allow the positioning of vertical jack tabs into a slot on the adapter’s top surface, and the attachment of 4 inch clamps to horizontal pinch-welds.
[Read the rest of this entry...]

The COMP Cams® Acura/Honda B-Series VTEC valve spring set (Fig. A) utilizes dual springs on the intake side and a single spring on the exhaust side. Below are the information and diagrams to ensure correct installation.
Installation Instructions:
Dual Intake Spring
Installed Height: 60lbs at 1.375
Open Height: 220 lbs at .875
Coil Bind Height: .815
Spring Rate: 300 lbs per inch
[Read the rest of this entry...]

After a three-year hiatus, the Type-S reintegrates the TL fold. For 2007, this version features a 3.5-litre V6, rather than a 3.2-litre. The engine makes 286 horsepower and can be mated to either a six-speed manual transmission or a five-speed automatic. The Type-S also comes specially equipped with exclusive wheels, front four-piston Brembo brake callipers, a firmed-up suspension, and more.
[Read the rest of this entry...]