Free PDF Manual Guide

Specially designed adapters are used in conjunction with Universal Anchoring System (UAS) stands and Universal Measuring System (UMS) pinchweld stands when securing vehicles with horizontal pinchwelds and vertical jack tabs in the corners of their center sections. (All Honda / Accord / Acura vehicles excluding Odessey.) These adapters allow the positioning of vertical jack tabs into a slot on the adapter’s top surface, and the attachment of 4 inch clamps to horizontal pinch-welds.
[Read the rest of this entry...]

Subject:
i-Honda-R DICE iPod Integration Kit for Honda/Acura, Radio Interface Kit
Installation Instructions:
1. Pull vehicle into service bay and access center console.
2. Disconnect both battery terminals. These cables must be disconnected during installation to insure proper initialization of the DICE module when it is connected.
Make sure you have the vehicle’s radio security code before disconnecting the battery cables! Detailed steps for removing the Honda/Acura radio can be found in your factory manual this supplement will ONLY show an outline for radio removal.
3. Remove any trim that may need to be removed to gain access to the screws/bolts holding the radio in place. On some vehicles, this may require removing the trim around the shifter and removing the coin and cup holders, finally getting to the trim surrounding the radio.
[Read the rest of this entry...]

Thank you for purchasing the Comptech Icebox Cold Air Intake for the 2002–2003 Honda Civic-Si and 2001 – 2003 Acura RSX. All components have been designed and manufactured utilizing the latest in technology and materials. Comptech recommends that you read through these instructions before starting installation and that you use an Acura Factory Shop Manual to supplement these instructions.
All Comptech products are intended to be installed by a professional installer. Always use jackstands to support the vehicle when a car lift is not available. Always work in a clean environment and use the appropriate safety equipment to avoid any potential damage or injuries.
[Read the rest of this entry...]

Specially designed adapters are used in conjunction with Universal Anchoring System (UAS) stands and Universal Measuring System (UMS) pinchweld stands when securing vehicles with horizontal pinchwelds and vertical jack tabs in the corners of their center sections. (All Honda / Accord / Acura vehicles excluding Odessey.) These adapters allow the positioning of vertical jack tabs into a slot on the adapter’s top surface, and the attachment of 4 inch clamps to horizontal pinch-welds.
[Read the rest of this entry...]

This interface connects an iPod directly to your Honda or ACURA audio system. lt’s on-board software translates commands from your Honda CD changer controls into commands that the iPod understands. This interface enables the iPod to take the place of a Honda CD changer and provides the following benefits:
Directs the iPod’s audio output to Honda vehicle audio system for optimal sound quality playback. Controls the iPod via vehicle’s radio and steering wheel controls. r Charges the iPod’s internal battery, and charging stops automatically at one hour after iPod is paused. iPod will go to SLEEP mode after charging
[Read the rest of this entry...]

Although this turbo system has been designed to use existing emissions controls (including catalytic converter), check local laws regarding aftermarket modification to emission controlled vehicles. Remove the turbocharger kit from its carton and inspect for any obvious physical damage. All kit components are thoroughly inspected and carefully packaged prior to shipment from the factory. If any shipping damage is evident, contact your supplier and request that they process a claim with the shipper involved. Be sure to review the Turbo System Parts List to verify that you have all necessary kit components to proceed. If any components in the parts list are missing, contact Turbonetics, Inc. Customer Service department.
[Read the rest of this entry...]

The NASA Honda Challenge Series was created to meet the needs of Honda/Acura owners looking for a series specifically tailored to accommodate Honda and Acura vehicles that are modified to a degree which might be found illegal in other racing series, yet provide a set of rules that would still accommodate existing Honda race cars and provide a “showcase” to unify the field.
[Read the rest of this entry...]

This part is street legal in all 50 states for use on 1996-2001 Honda Acura Integra Type R vehicles.
1. Please read through the entire instruction sheet to familiarize yourself with the installation before you begin.
2. Start the engine and check for loose connections or coolant/vacuum leaks, etc.
3. Disconnect the negative battery terminal.
4. Remove the air filter duct, all vacuum hoses, water (coolant) hoses and electrical connectors from the stock throttle body. Mark all hoses and wires to ensure that they are installed correctly on the new throttle body.
Note: Engine coolant may run from the hoses once disconnected. Plug the end of the hose temporarily.
[Read the rest of this entry...]

This unit is designed for applications in a wide variety of HONDA and ACURA vehicles across many years and models. Advanced features including on-screen text, steering wheel, radio and touch screen control of your iPOD. The IPOD LOCKPICK will operate in XM capable HONDA or ACURA radios (button labeled XM present) without the loss of any factory functions, even if a factory XM tuner is present. Included with your interface are licensed connectors for reliable iPOD operation and stereo AUX input jacks for connection to any other source you would like to play through your factory sound system.
[Read the rest of this entry...]

Specially designed adapters are used in conjunction with Universal Anchoring System (UAS) stands and Universal Measuring System (UMS) pinchweld stands when securing vehicles with horizontal pinchwelds and vertical jack tabs in the corners of their center sections. (All Honda / Accord / Acura vehicles excluding Odessey.) These adapters allow the positioning of vertical jack tabs into a slot on the adapter’s top surface, and the attachment of 4 inch clamps to horizontal pinch-welds.
[Read the rest of this entry...]