Free PDF Manual Guide

Part Content:
This will also space out the entire wheel, widening the track width of the vehicle. Fender clearances should be checked on lowered cars, and longer lug studs or wheel bolts are usually required. Note: The Wheel Industry Council has issued guidelines advising wheel spacers not be used. It is the responsibility of the customer to insure wheel spacers are properly specified and installed.
[Read the rest of this entry...]

This product is designed to be used exclusively on a Acura MDX. Acura is not responsible if the unit is used for any other intended purpose.

This Owner’s Manual should be considered a permanent part of the the vehicle. It should remain with the vehicle at all times and stay with the vehicle when sold.
[Read the rest of this entry...]

The HONASX can either provide up to 2 auxiliary audio inputs to your Honda radio for use with any device that has RCA line level outputs, or provides 1 auxiliary audio input and allows interfacing an aftermarket CD Changer. AUX 1 is the 8 pin DIN to RCA cable which plugs into the 8 pin DIN port on the HONASX interface. AUX 2 is the set of RCAs that are wired directly to the HONASX. These audio inputs are perfectly suited for Multimedia devices such as VCRs, DVD’s, Game Systems or TV tuners. Portable music players such as MP3, MD and CD players can utilize these inputs as well.
[Read the rest of this entry...]

1. Verifying Hardware and Software Requirements
1.1. Minimum Hardware Requirements
To find the hardware configuration of the system, ask your system Administrator.
Pentium class microprocessor or better 128 Mbytes of RAM 20 Mbytes of free disk space on your hard drive
1.2. Minimum Software Requirements
Microsoft(R) Windows(R) XP with Service Pack 2
[Read the rest of this entry...]

What is the SmartMAP?
The SmartMAP model SS-300 replaces the check valve and restrictor assembly used by most Honda/Acura turbo and supercharger kits and prevents the engine computer (ECU) from shutting down the engine when the manifold pressure is above atmospheric (boost).

How does the SmartMAP work?
The SmartMAP connects inline with the stock (OEM) manifold absolute pressure (MAP) sensor and limits the MAP voltage that is applied to the ECU. The limit (clamp) voltage value is preset and can not be adjusted.
[Read the rest of this entry...]

Whether you buy or lease a Honda vehicle, Honda Financial Services can assist you with the process. Please ask your dealer which lease or purchase plan best suits your needs. Want your own look? Ask your dealer about Honda Genuine Accessories.They’re designed, engineered and tested to meet the same exacting standards as your new vehicle – and a high-quality way to make your new Honda a reflection of your one-of-a-kind personality.
[Read the rest of this entry...]

Thank you for purchasing the Comptech Icebox Intake kit for the Acura TSX. All components have been designed and manufactured utilizing the latest in technology and materials. Please take a moment to read this instruction manual and warranty information page thoroughly before starting any work. Remember to always use jackstands to support the vehicle when a car lift is not available. Always work in a clean environment and use the appropriate safety equipment and tools to avoid any potential damage or injuries. Comptech recommends the use of a Genuine Honda Service Manual to supplement these instructions. All Comptech products are intended to be installed by a professional installer. Many stock parts are reused during installation. Do not damage or discard any pieces during disassembly or installation. We recommend marking any hose or wire before disconnecting to avoid confusion during reassembly.
[Read the rest of this entry...]

The COMP Cams® Acura/Honda B-Series VTEC valve spring set (Fig. A) utilizes dual springs on the intake side and a single spring on the exhaust side. Below are the information and diagrams to ensure correct installation.
Installation Instructions:
Dual Intake Spring
Installed Height: 60lbs at 1.375
Open Height: 220 lbs at .875
Coil Bind Height: .815
Spring Rate: 300 lbs per inch
[Read the rest of this entry...]

Preparation Steps for Fuel System Installation
A: Adjust both seats to full forward position with seat backs in full upright position.
B: Disconnect the negative battery cable.
C: Remove the 5 rear interior panels starting with the long piece across the width of the car just beneath the rear glass. Next remove the two flat panels located behind the seats. Next remove the two corner pieces. Lastly, remove the rear center speaker and cover assembly. (The long panel across the width has 3 push lock barbed style securing pins w/one on each end and one in the center) (The 2 flat panels have 4 push lock barbed securing pins each, w/each barb located a couple of inches from each corner of the panels) (The corner sections are held in place with 3 Philips screws which become exposed after the flat panels are removed)
[Read the rest of this entry...]

When choosing a mounting location remember: Leave at least 3 inches of clearance for the cable. The PhatBox should be mounted parallel or perpendicular to the floor of the car. Don’t mount near wiring or fuel lines. Leave the front of the PhatBox unobstructed for easy insertion of and removal of the cartridge. The unit should be mounted to a hard stable surface, such as particle board or sheet metal.
[Read the rest of this entry...]