Free PDF Manual Guide

Thank you for purchasing the Comptech Icebox Cold Air Intake for the 2002–2003 Honda Civic-Si and 2001 – 2003 Acura RSX. All components have been designed and manufactured utilizing the latest in technology and materials. Comptech recommends that you read through these instructions before starting installation and that you use an Acura Factory Shop Manual to supplement these instructions.
All Comptech products are intended to be installed by a professional installer. Always use jackstands to support the vehicle when a car lift is not available. Always work in a clean environment and use the appropriate safety equipment to avoid any potential damage or injuries.
[Read the rest of this entry...]

The New PA11-HON2Y interface connects iPod products directly to Honda/Acura audio system. Its on-board software translates the factory radios external CD Changer controls functions into commands that the iPod understands. This interface enables the iPod to provide the following benefits:
1. Direct connection of the iPod to Honda vehicle audio system for optimum sound quality
2. Two playback modes:
Hybrid mode: select songs and playlist on the iPod using the CD Changer buttons on the radio
Direct Mode: Search and select songs directly on the iPod using the clickwheel and select button on the radio.
[Read the rest of this entry...]

The New PA11-HON2Y interface connects iPod products directly to Honda/Acura audio system. Its on-board software translates the factory radios external CD Changer controls functions into commands that the iPod understands. This interface enables the iPod to provide the following benefits:
1. Direct connection of the iPod to Honda vehicle audio system for optimum sound quality
2. Two playback modes:
Hybrid mode: select songs and playlist on the iPod using the CD Changer buttons on the radio
Direct Mode: Search and select songs directly on the iPod using the clickwheel and select button on the radio.
[Read the rest of this entry...]

The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.”
NOTE: These installation instruction show the left fog light begin installed. The same procedure applies to installing the right fog light.

1. Make sure you have the anti-theft code for the radio, write down the frequencies for the preset buttons.
2. Disconnect the negative cable from the battery. Installing the Fog Light
3. Open the hood. Loosen the battery bracket nut. Remove the radiator cover (seven clips and one bolt).
4. Remove the four clips, four bolts, and two self-tapping screws that fasten the front bumper. Remove the front bumper.
5. Using masking tape, cover the bumper around the fog light opening.
6. Using a utility knife, slowly and carefully cut out the fog light opening. Be sure to cut your lines as straight as possible, and do not damage the bumper. Remove any burrs from the edges of the fog light grille opening with a file.
7. Attach the rubber trim to the edge of the fog light opening.
8. Position the left fog light adjuster on the left fog light, and install one step screw and one 4 x 8 mm washer-screw.

Download

The Reaper is a centrifugal disc clutch designed to mount on a ¾” crankshaft or jackshaft for race karts with engines up to 20hp. This manual will help you gain maximum performance as well as longevity of the components. This is a racing clutch and should not be used in any application other than kart racing. Aluminum drum is for use in stock and super stock classes. Steel drum is required on jackshaft mounting for 2 stroke racing and in limited and limited mod classes in 4 stroke racing. The Reaper clutch features Cryogenic treatment to all critical components for superior performance, cooling, and longevity.
[Read the rest of this entry...]

1. All machine work may be accomplished on a CNC vertical mill capable of 3-4 axis interpolation with sufficient height to accommodate block height. The bore center distances must be maintained within ±.0005 for sleeve installation to seal properly. (see block specification sheets for dimensions)(See #12 for bore center specs.)
2. All machining must produce a good surface finish and the tolerances must be maintained to assure a quality fit and sleeve seal.
3. Block must be square and perpendicular to machine head. Fixturing should be on main journals provided they are not cracked or [Read the rest of this entry...]

This part is street legal in all 50 states for use on 1996-2001 Honda Acura Integra Type R vehicles.
1. Please read through the entire instruction sheet to familiarize yourself with the installation before you begin.
2. Start the engine and check for loose connections or coolant/vacuum leaks, etc.
3. Disconnect the negative battery terminal.
4. Remove the air filter duct, all vacuum hoses, water (coolant) hoses and electrical connectors from the stock throttle body. Mark all hoses and wires to ensure that they are installed correctly on the new throttle body.
Note: Engine coolant may run from the hoses once disconnected. Plug the end of the hose temporarily.
[Read the rest of this entry...]

Thank you for purchasing the PES G2 supercharger system. We have gone to great length to engineer this system to be a true bolt-on affair. Please read the entire instruction manual thoroughly before proceeding. If there is any part of the installation procedure that you are not comfortable with, please have a professional mechanic install the system.

PLEASE NOTE:
• The photos used in this manual were taken during the installation on a 2000 A4. There will be a special “NOTE” listed when there is a variation in the installation procedure.
• New PES supplied parts will be underlined in this manual.
[Read the rest of this entry...]

Parrot UNIKA is a universal interface that allows you to control the Parrot MKi9000/MKi9100/MKi9200 directly with the OEM steering wheel commands. Parrot UNIKA can work with car protocols such as CAN, KBUS or resistive systems.

Installation of Parror MKI
We recommend you to install the Parrot MKi before installing the UNIKA. Make sure the installation is correctly performed by checking if the
«Good bye» message is displayed when you turn off the ignition.
[Read the rest of this entry...]

Whether you buy or lease a Honda vehicle, Honda Financial Services can assist you with the process. Please ask your dealer which lease or purchase plan best suits your needs. Want your own look? Ask your dealer about Honda Genuine Accessories.They’re designed, engineered and tested to meet the same exacting standards as your new vehicle – and a high-quality way to make your new Honda a reflection of your one-of-a-kind personality.
[Read the rest of this entry...]