Free PDF Manual Guide

This guide shows how to open a menu feature as follows: Find it: s > e Messages > New Message This means that, from the home screen:
1 Press the center key s to open the menu.
2 Press the navigation key S to scroll to e Messages, and press the center key s to select it.
3 Press the navigation key S to scroll to Create Message, and press the center key s to select it.
[Read the rest of this entry...]

The ROM monitor is a small program that allows Micropak to debug other, user programs, in the starter kit boards. These boards are supplied with the TOPAS starter kits. In order to perform debugging you must first program the microcontroller on the board with your program and the accompanying ROM monitor. You can do this by selecting the Program command from the Project menu. This should display the Program dialog box. Before pressing OK to start programming make sure that the Include ROM Monitor option is selected. If this option is disabled, then you have probably not selected a ROM Monitor microcontroller. To do this go to the Project Settings dialog box and select a Processor which contains the words “ROM Monitor”.
[Read the rest of this entry...]

All 1989-94 BMW vehicles are equipped with a self diagnostic system for the detection of injection faults. When a fault is detected by the system the Electronic Control Unit (ECU) records the code corresponding to the defect in the ECU’s memory until either:
1) The vehicle battery or the ECU is disconnected.
2) The engine is started 60 times with no recurrence of the fault.
3) The ECU memory is cleared using the BMW MODIC, DIS, Bosch KTS300, KTS500, or the Baum Tools CS1000 or CS2000 BMW hand held scanner.
[Read the rest of this entry...]

Development with Aibo is possible using the OPEN-R SDE. The OPEN-R SDE is a set of tools
released by Sony for the development of programs for Aibo. It is composed by the OPEN-R SDK,
the R-Code SDK, the Aibo Remote Framework and the Aibo Motion Editor. This document
describes how to set up a research environment with an Aibo robot for the use of those tools, but it
does not includes instructions about how to use the tools or how to program the robot. For those
other purposes you can consult the official documentation or the other documents released by the
same author of this document
[Read the rest of this entry...]

Introducing your new Motorola Q CDMA wireless phone! You can check and write e-mail, use the QWERTY Keyboard for texting capabilities, and use it with Bluetooth Enabled headsets. Here’s a quick anatomy lesson.

This guide shows how to locate a menu feature. Press the Left and Right Soft Keys to select screen menus and options. Use the Navigation key (S) to scroll and highlight menu features. Press the Center Select key (s) to select items.
[Read the rest of this entry...]

After car crashed and airbag had deployed, VW-Audi airbag sensor will stay locked (Control unit faulty or deployed) and must be replaced. Even after small accident, Airbag sensor will write into it’s internal memory an error message “crash data stored” or “computer fault” and after it need to replace the expensive sensor to a new one. With our VAG Airbag Reset Tool you can reset and repair the airbag computer in your workshop in 1 minute. No need to remove airbag sensor from the car.
[Read the rest of this entry...]

There are a number of different Samsung keyphone systems eachdesignated with the prefix ‘DCS.’ The original system is called simply the ‘DCS.’ Other systems are designated DCS Compact II, DCS-816, DCS-408 and DCS-408i. For simplicity, this guide uses the designations ‘DCS,’ ‘Compact II,’ ‘816,’ ‘408’ and ‘408i’ when referring to individual systems.
[Read the rest of this entry...]

After car crashed and airbag had deployed, VW-Audi airbag sensor will stay locked
(Control unit faulty or deployed) and must be replaced. Even after small accident, Airbag sensor will write into it’s internal memory an error message “crash data stored” or “computer fault” and after it need to replace the expensive sensor to a new one. With our VAG Airbag Reset Tool you can reset and repair the airbag computer in your workshop in 1 minute. No need to remove airbag sensor from the car.
[Read the rest of this entry...]

Learn how to become more proficient in using a personal computer.
Components of a personal computer
Hardware and software
Drag and Drop
Cut, Copy, and Paste
Storage media
Creating and organizing folders
Keyboard shortcuts
Searching for files and folders
[Read the rest of this entry...]

a. Ensure Nokia PC Suite is Installed on your PC (refer to Nokia User Manual)
b. Connect your phone to the PC using your Data Sync Cable-USB
c. Select ‘PC Suite’ on the phone
d. Open Nokia PC Suite on your PC/Laptop
e. Open File Manager
f. Navigate to Nokia EXX\Phone memory\Data\Installs
[Read the rest of this entry...]