Free PDF Manual Guide

Tools Needed To Complete This Install Hand tools needed Accessory tools needed to test and to remove radio wire the new radio PLUS: Wire ties or electrical tape: to neatly bundle and organize your wires for a professional appearance. TOOL TIPS: Small Battery: use a battery to test speaker wires. Touching the (+) positive and (-) negative baterry leads to a pair of speaker will cause the speaker to make a “Pop” sound indicating that pair of wires goes to that speaker. Voltage Meter: Always check +12 Volt power wires for voltage before making wire connections. These wires will fluctuate between 10 and 14 Volts. Solder Iron or Crimp Tool: make wire to wire connections using either a solder iron and electrical tape, OR plastic crimp terminals found at most hardware or auto parts stores.
[Read the rest of this entry...]

Once the MBU-2000 connects with a mobile device, the green LED (phonebook upload indicator) starts flashing. The LED flashes each time a connection is established with a mobile phone. As the LED flashes, the MBU-2000 determines whether the mobile phone is phonebook sync compatible and downloads the phonebook contacts automatically. When this process is complete, the flashing green LED becomes a solid green LED.
[Read the rest of this entry...]

A high standard of safety is tradition and a top priority at Mercedes-Benz. Our vehicles are state-of-the-art and this is especially true regarding safety. Our comprehensive safety philosophy extends to providing rescue personnel with specific information about our vehicles. As their top priority is to save lives, the rescue personnel must be able to reach accident victims as quickly as possible without exposing anyone to additional danger.
[Read the rest of this entry...]

Here are the steps for Mercedes-Benz E-Class Interface W211 Installation/Connection:
1. Interface module full-set
2. Remote function & connection feature
3. Disassemble guide
To connect interface , have to release command system and Gear box in the circle
After Shift -Lever on Drive- mode , Pull out gearbox as arrow direction
[Read the rest of this entry...]

Is it us, or are European luxury-car manufacturers marching boldly into car markets other makers have been shrinking from? They already offer a batch of premium wagons here, and more are on the way. Ditto for sports cars and convertibles, two more market segments where other manufacturers haven’t exactly been clamoring to get in.
[Read the rest of this entry...]

These guidelines contain several methods for rescuing accident victims from a vehicle. We must emphasize, however, that these guidelines cannot claim to be exhaustive and on no account should they, nor are they intended to, act as a substitute for proper specialist training and the relevant specialized literature.
[Read the rest of this entry...]

Prepare to enjoy the many pleasures of listening to a superb sound system: the Mercedes-Benz AM and FM stereo radio with cassette player. This Operation Guide is designed to give you both a quick reference of basic functions and features and a detailed description of the system’s entire range of operation. To maximize your listening satisfaction, take a few minutes to carefully review all sections of this guide.
[Read the rest of this entry...]

Testing with the impulse counter should be carried out for rapid fault diagnosis. The
impulse counter output shows only existing faults, since the ACC system does not have
memory capabilities. If one or more faults are indicated, repair as necessary and repeat
the test. Be sure that fuse #7 is good, the battery voltage is between 11-14 volts and the
temperature selector wheel is set to 22°C.
1. Connect the impulse counter to the on-board diagnostic connector.
Black lead of the impulse counter to socket 1
Yellow lead of the impulse counter to socket 7
Red lead of the impulse counter to battery positive terminal.
2. Turn the ignition to the “ON” position.
The LED “U Batt” will be illuminated. If the LED “U BATT” does not illuminate,
check for voltage between socket 1 of the on-board diagnostic connector and
the positive terminal of the battery. If the voltage is not between 11-14 volts,
check for an open circuit or loose ground connection.
Test for voltage between socket 7 and socket 1 of the diagnostic connector.
The voltage should be 6 – 12 volts.
3. Depress the start button for 2 – 4 seconds.
Fault codes will be indicated by the number in the impulse counter display
window. Take note of the impulse display number.
Faults are displayed in ascending order.
The number 1 indicates that no faults are stored in memory.
During the impulse readout, The LED indicator in the fresh air/recirculation
switch will blink.
4. Repeat step 3 until all faults are indicated. After all fault codes have been
displayed, pushing the start button again for 2 – 4 seconds will repeat the fault code
readout sequence.

Source

Subject:
i-Honda-R DICE iPod Integration Kit for Honda/Acura, Radio Interface Kit
Installation Instructions:
1. Pull vehicle into service bay and access center console.
2. Disconnect both battery terminals. These cables must be disconnected during installation to insure proper initialization of the DICE module when it is connected.
Make sure you have the vehicle’s radio security code before disconnecting the battery cables! Detailed steps for removing the Honda/Acura radio can be found in your factory manual this supplement will ONLY show an outline for radio removal.
3. Remove any trim that may need to be removed to gain access to the screws/bolts holding the radio in place. On some vehicles, this may require removing the trim around the shifter and removing the coin and cup holders, finally getting to the trim surrounding the radio.
[Read the rest of this entry...]

Car Configuration Switch.
Each radio needs to operate in a certain mode so that it can display CD TEXT. Select the proper dipswitch setting for the DICE iPod module to operate in CDC or SAT mode. Operation of the DICE kit in different modes will slightly differ. Look for icons calling out the differences.
[Read the rest of this entry...]