Free PDF Manual Guide

User Manuals – Owners Manual – User Guide

1992 Mitsubishi Engine 4G61 4G63 4G64 Service Manual

Part Content:Lubrication system oil pump type cooling system water pump type and number, throttle position sensor, closed throttle position switch. Total resurfacing depth both cylinder head and cylinder block, overall height. The camshaft identification mark is stamped on the rear end of the camshaft, fuel pump driving cam diameter journal diameter.

Download

Leave a Comment

PROFIBUS DP Actuator Option Card Guide for use with Mitsubishi

This guide details the necessary settings and procedures required to establish Networked communications between a Rotork Actuator and a Mitsubishi Qn PLC using Profibus DP. This document relates to the Profibus module as applied to an IQ, IQT or Q series valve actuator.
[Read the rest of this entry...]

Leave a Comment

MITSUBISHI NEW TRUCK SRT GUIDE

• This is a guide only to assist dealers and customers to select the most suitable truck. The new finished vehicle must be checked for compliance before going on the road either at a testing station or by a LTSA approved engineer.
• Trucks with a GVW over 12000 kg have to comply to an SRT of 0.35g. Tractors do not have to comply.
[Read the rest of this entry...]

Leave a Comment

Mitsubishi Caterpillar Forklift America Supplier Training Guide

Mitsubishi Caterpillar Forklift America (MCFA) has partnered with Ryder Logistics to manage their inbound and outbound freight. MCFA users and Suppliers will submit their orders for pickup using either SUPPLIERNet or RyderEntry (a module of Ryder Online). RyderTrac, also a module of Ryder Online, will be used to track and trace loads in transit.
[Read the rest of this entry...]

Leave a Comment

1994 Mitsubishi Expo LRV Engine Overhaul

This pdf contains the ENGINE OVERHAUL 1994 ENGINE Chrysler Corp./Eagle/Mitsubishi 2.4L 4-Cylinder information.
Removal
1. Remove radiator shroud, cooling fan and pulley. Remove all drive belts and crankshaft pulleys. Remove
upper timing belt covers and gaskets. Note bolt length and location.
CAUTION: DO NOT rotate crankshaft counterclockwise (as viewed from timing
belt end of engine). If timing belt is to be reused, mark direction of
rotation before removing.
[Read the rest of this entry...]

Leave a Comment

2006 MITSUBISHI ECLIPSE GT

The brand new Eclipse is more eye-catching than the old model, but it’s the increased width that is most noticeable. This front-wheel-drive sports car is available in a 2.4-litre four-cylinder GS and 3.8-litre V6 GT.
[Read the rest of this entry...]

Leave a Comment

Mitsubishi L300 Engine Inspection Procedure

POWER STEERING OIL PUMP DRIVE BELT TENSION CHECK AND ADJUSTMENT : With your finger tip lightly tap the centre of the belt between the pulleys in the location shown by the arrow in the illustration and then measure the belt vibration frequency. Apply 98N of pressure against the location between the pulleys shown by the arrow in the illustration and then measure the deflection.
[Read the rest of this entry...]

Leave a Comment

2008+ Mitsubishi Lancer QuickLIFT Installation Guide

Remove all items from the packing tube. You should have the following before beginning:
* (2) Gas springs (RT-QL-170-A6A) – Be sure to cycle them a few times before installing.
* (4) #2-3/16″ Multi-grip rivets (used on hood brackets)
* (2) ball-studs and washers each with a locking nut.
* (2) mounting brackets
* Printed Color Instructions
* Gas Spring locking clips – (Already installed in the gas spring ball-ends – Remove before assembly)
[Read the rest of this entry...]

Leave a Comment

Honda Throttle Linkage Kit Instruction

his kit is designed to fit both the 120&160 engine platforms. The only difference you will find between the 120 and the 160 engine is the direction the cable adjustment block is installed on the engine block.
1. Remove the stamped factory linkage plate and related hardware.
2. Check your carburetor and confirm the throttle arm (black plastic molded arm on the top of the throttle shaft) is in good working condition.
3. Install the Linkage Bridge to your engine using the two supplied metric socket head bolts. A drop of thread locking compound on each bolt is recommended to prevent bolts from coming loose from vibration and harmonics.
[Read the rest of this entry...]

Leave a Comment

The New Mercedes-Benz 3-Cylinder Diesel Engine

For the joint project Smart For four and Mitsubishi Colt, Mercedes-Benz developed a 3-cylinder diesel engine derived from the A-Class 4-cylinder engine. This engine allows both high performance and low fuel consumption. The top version with 70 kW is the world’s most powerful three-cylinder passenger car diesel engine.
[Read the rest of this entry...]

Leave a Comment