Free PDF Manual Guide

Motorola M900 is an ergonomically designed fixed mobile car phone, uniquely designed for the vehicle environment. With its voice activation feature, enhanced display screen and all round hands-free environment, the M900 is the more convenient way to talk and drive.
[Read the rest of this entry...]

Obtaining Jaiku Mobile for your phone
If Jaiku Mobile is not preinstalled on your phone, you can obtain the software by signing up at www.jaiku.com Follow the instructions on the Web to download Jaiku Mobile wirelessly to your handset.
1.1 Compatible handsets Jaiku Mobile is compatible with the Nokia S60 operating system software versions 3.0 and 3.1. The following handsets are supported at time of printing:
[Read the rest of this entry...]

Once the MBU-2000 connects with a mobile device, the green LED (phonebook upload indicator) starts flashing. The LED flashes each time a connection is established with a mobile phone. As the LED flashes, the MBU-2000 determines whether the mobile phone is phonebook sync compatible and downloads the phonebook contacts automatically. When this process is complete, the flashing green LED becomes a solid green LED.
[Read the rest of this entry...]

These guidelines contain several methods for rescuing accident victims from a vehicle. We must emphasize, however, that these guidelines cannot claim to be exhaustive and on no account should they, nor are they intended to, act as a substitute for proper specialist training and the relevant specialized literature.
[Read the rest of this entry...]

Step 1
Decide on the presentation method for your final product, i.e. will the design be printed or used in a powerpoint presentation?
New page settings for on screen presentation
New page settings for a printed page

Step 2
Select the shape tool from the side toolbar, then choose the rounded edge rectangle from the top toolbar selection of shapes. Click and drag a rectangle of a suitable proportion for your design. Don’t worry abouit the colour of the phone as it will be changed later. If you are a bit adventurous try the different shapes available in the pull down shape menu.
[Read the rest of this entry...]

Testing with the impulse counter should be carried out for rapid fault diagnosis. The
impulse counter output shows only existing faults, since the ACC system does not have
memory capabilities. If one or more faults are indicated, repair as necessary and repeat
the test. Be sure that fuse #7 is good, the battery voltage is between 11-14 volts and the
temperature selector wheel is set to 22°C.
1. Connect the impulse counter to the on-board diagnostic connector.
Black lead of the impulse counter to socket 1
Yellow lead of the impulse counter to socket 7
Red lead of the impulse counter to battery positive terminal.
2. Turn the ignition to the “ON” position.
The LED “U Batt” will be illuminated. If the LED “U BATT” does not illuminate,
check for voltage between socket 1 of the on-board diagnostic connector and
the positive terminal of the battery. If the voltage is not between 11-14 volts,
check for an open circuit or loose ground connection.
Test for voltage between socket 7 and socket 1 of the diagnostic connector.
The voltage should be 6 – 12 volts.
3. Depress the start button for 2 – 4 seconds.
Fault codes will be indicated by the number in the impulse counter display
window. Take note of the impulse display number.
Faults are displayed in ascending order.
The number 1 indicates that no faults are stored in memory.
During the impulse readout, The LED indicator in the fresh air/recirculation
switch will blink.
4. Repeat step 3 until all faults are indicated. After all fault codes have been
displayed, pushing the start button again for 2 – 4 seconds will repeat the fault code
readout sequence.

Source

To make an Internet Call by using NOKIA Wi-Fi phones, you can now simply register a new Owtalk account and install Owtalk InternetVoice into your NOKIA Wi-Fi phone. Please refer to the following instructions to configure your mobile phone and make Internet calls by using Owtalk InternetVoice.
[Read the rest of this entry...]

“MHG” application is a value-added service on Nokia S60 3.0 platform. It have lots of functions:1. Phone guardian. 2.Turn off and open phone time. 3.Record phone call conversations. 4.Record voice. 5.Capture pictures. 6.Keyboard autolock. 7.Multi-function.
[Read the rest of this entry...]

This guide will familiarize you with wireless service and your new phone through simple, easy-to-follow instructions. It provides information on:
• Activating your wireless service
• Your phone features and navigation
• Basic functions of your w385 phone
• Contact information
For more information about your w385 mobile phone, please contact your wireless service provider.
[Read the rest of this entry...]

This guide tells you how to get started with Nokia Mobile Web Server in your mobile device. For more detailed information on how to use the Web Server, see Nokia Mobile Web Server User Guide.
The Web Server enables you to do the following:
• Create your own mobile web pages
• Create blogs to your web pages using a mobile device or a computer (web browser)
• Chat with web users who visit your mobile site
• Share content (for example, pictures) through your mobile device
• Share your mobile device calendar
• Share your presence information
[Read the rest of this entry...]