E50-Opel Corsa Towbar Fitting
1 2 3 4 5 6 7 8 8 9 9 9 9 10 10 11 11 11 A Plastic elements B Clamp mark in acc. with ISO PN Cables joining 1 L Left directional lights 2 + Rear fog lights 3 31 Ground 4 R Right directional lights 5 58R Right side parking lights 6 54 Stoplights 7 58L Left side parking lights FITTING INSTRUCTION This towbar is designed to assembly in following cars: OPEL CORSA “D”, 3/5 doors, produced since 2007, catalogue no. E50 and is prepared to tow trailers max total weight 1300 kg and max vertical load 50 kg. From manufacturer Thank you for buying our product. Their reliability has been confirmed in many tests. Reliability of towbar depends also on correct assembly and right operation. For this reasons we kindly ask to read carefully this instruction and apply to hints. The towbar should be install
[Read the rest of this entry...]
VAUXHALL / OPEL CORSA 1.2, 1.4 Spi 60BHP 1993-99 57-0298 Instruction Sheet A2054-796 Page 1 of 2 PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE FITTING THE KIT. Note: the kit fits both models. Photo A Photo B 1. Unclip and remove the intake hose from the air box assembly. 2. Remove the air box hot air flap vacuum hose from the rear of the intake housing. Blank off the vacuum outlet pipe with the rubber plug supplied. 3. Unclip and remove the intake scoop from the front cross member and air box assembly. 4. Remove the flexi hose from between the exhaust manifold and the air box hot air flap. 5. Remove the air box assembly from the front mounting rubber, then slide the assembly out of the rear mounting grommets. Remove the assembly from the car. 1. Fit the new mounting bracket to the original rear air box mounting grommet
Opel Airbag Reset Tool user manual http://www.dlsmelecom.com/ Opel Airbag Reseter After car crash and airbag deployment, Opel airbag sensor always stay locked (Controlunit faulty or deployed) and must be replaced. Even after small accident Airbag sensor will write in internal memory special error message “crash data stored” or “computer fault” and after you need to exchange very expensive sensor to new one. With our Opel Airbag Reset Tool you can reset and repair airbag computer in your office in 1 minute. No need to remove airbag sensorfrom the car. How Opel Airbag Reseter works: Very simple user instruction: connect this tool to Opel OBD II connector (for cars from year 1996-2002). RED button is for airbag “crash data” erase.Push this button once and wait: yellow light start to flash and after 15 second green light inform you that “crash data” is erased. Red light set ON if erasing is not
TROUBLE SHOOTING OPEL / VAUXHALL 1 A0909032-1 Trouble shooting – OPEL / VAUXHALL Preface The program cassette in the Multi-Tester pro is the component which gives the diagnostic equipment its unique test performance. The program cassette can easily be changed to set the Multi-Tester pro up quickly for the diagnostic task at hand. The Multi-Tester pro software is available in two levels of functionality, Plus line and Pro line. This manual covers the operation of the Pro line cartridge. Although operation and display screens are identical for each line, please be aware that some of the functions described are not available on Plus line cartridges. The Plus line cartridge has the following functions: engine DTC:s and monitor list, airbag DTC:s, ABS DTC:s and service light resetting as well as snapshots. This fault-finding instruction describes the serial application for trouble shooting via the diagnostic connector on Opel and Vauxhall. Copyright AUTODIAGNOS
OPEL 2000 1 Keep these instructions for future use. The Owner’s Manual Residential Factory Built Fireplace Operation Maintenance Installation OPEL 2000 opel/09/99 manual OPEL 2000 2 Dear Customer, The OPEL 2000 incorporates technology with elegance to give you a beautiful view of the fire without compromising on heating efficiency or environmental quality. We have designed your new OPEL 2000 to be easy to install, operate and maintain. It is in your best interest to become familiar with it. Study your manual to be sure that the installation is correct, then follow the guidelines for operation and maintenance. We at RSF ENERGY congratulate you on your choice of the OPEL 2000, and are confident that you have purchased a fireplace that is simply, the best. Sincerely, The RSF Energy Team, Septembre 1999. SAFETY FIRST 3 Do s and Don ts 3 Creosote Formation and Need for Removal GENERAL SPECIFICATIONS 3 Combustion
INSTALLATION PRECAUTIONS Choose the mounting location carefully, observing the following – The unit is not subject to temperatures exceeding 55 C (Such as in a car parked in direct sunlight) – The unit is not subject to direct sunlight. – The unit is not near heat sources (such as heaters). – The unit is not exposed to rain or moisture. – The unit is not exposed to excessive dust or dirt. – The unit is not subject to excessive vibration. WARRANTY – This product is covered by a 12month warranty valid from the date of purchase – The adapter and lead will be replaced free of charge if failure is due to a manufacturing defect. – The adapter must have been fitted as per the installation instructions. – The unit must be returned to your supplier for any claim under the terms of this warranty. – This does not affect
This Dash Mount is designed for: Location: Tools Required: Monteringsanvisning Mounting Instruction Do not use force when working with plastic components. Use extreme care not to scratch the interior of the vehicle. MTU may not be held liable for any damage to a vehicle connected to the installation. Correct direction of the rose pattern. Steg 1: Vipp av den ytre rammen med luftedyser midt på dashbordet. Steg 2: Tre Dash Mounten inn på rammen. Plasse- ring kan justeres etter ønske. Steg 3: Press rammen med dyser på plass igjen. On the center air vent. Flat bending tool Step 1: Tilt out the outside frame and air vent. in the middle of the dashboard. Step 2: Tread the Dash Mount on the frame. You can choose the position as you wish. Step 3: Press the frame back into position. Opel Vectra A ………………….. 1989-1995 …………… 2 x Airbag Opel Calibra …………………….
Volume 28, Issue 2 March/April 2008 Inside this issue: ZDDP: What you NEED to know OMC 2008 Election Results OMC Member Letters Tech Tip, Part 2: Engine Rebuilds and Drivetrain Installations Simplifying Opel Drivetrain Rebuilds ACHTUNG! Welcome to the Opel Motorsport Club THE OPEL M OTORSPORT CLUB IS CELEBRATING ITS 28TH YEAR OF DEDICATION TO THE PRESERVATION AND APPRECIATION OF ALL GERMAN OPELS , WITH SPECIAL EMPHASIS ON MODELS IMPORTED INTO THE UNITED STATES . WE ARE HEADQUARTERED IN THE LOS ANGELES AREA, AND HAVE CHAPTERS ACROSS THE COUNTRY, IN EUROPE, AS WELL AS MEMBERS IN CANADA AND MEXICO. MEMBERSHIP BENEFITS INCLUDE SUBSCRIPTION TO OUR NEWSLET- TER, THE BLITZ, LISTINGS FOR PARTS AND SERVICE SUPPLIERS, BLITZ INDEX & TECH TIP INDEX (1985-DATE), FREE CLASSIFIED ADS (3 PER YEAR), CLUB ITEMS, MEMBER ROSTER, OWNER SUPPORT AND ACTIVITIES , INCLUDING MEETINGS AND OUR ANNUAL PICNIC & CAR SHOW ON THE COVER: “Zen
LAUNCH Key Matching Instruction for OPEL 1 Key Matching Instruction for OPEL Immobilizer and Anti-Theft Warning System The main available function of X-431 is [Match Remote Key] for Anti-Theft Alarm system of OPEL and [Match Ignition Key] for the immobilizer system. Please follow the screen tips to perform the easy operation. Precautions: 1) The engine can be started only with the authorized keys that have been matched with the vehicle immobilizer controller. 2) When performing key matching, always match all the keys at the same time with the vehicle immobilizer control unit. 3) For the sake of security, all other authorized keys must be re-matched with X-431 if one of the authorized key was lost; thus the lost key becomes unauthorized and cannot be used to start the engine. The operation for immobilizer system is similar to that of the anti theft warning system. Here we only take give the