Free PDF Manual Guide

User Manuals – Owners Manual – User Guide

A Guide to Paint.Net

The following is intended as an introduction to Paint.Net and an explanation of how to use the main tools. It is not meant as a guide to fixing images, because I am still very much a beginner in this area. More information can be obtained from the material in the Help file, and the tutorials and helpful hints in the on-line Forum. Those of you, who have already done some editing with Photoshop or other imaging programs, will find it much easier than those just starting out. If you don’t want to do any more than a slight tweaking, straightening and cropping of your photos then a program like Picasa is probably all you really need. If you want more control over the results, you need an imaging and photo manipulation program like Paint.Net.
[Read the rest of this entry...]

Leave a Comment

2008 Honda Accord 2-Door Trunk Spoiler Installation Instructions

The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.”

NOTE:
• Be careful not to damage the body paint finish.
• This trunk spoiler kit should be installed only if the ambient air temperature is 60°F (15°C) or above.
• Wash and wax the area to be covered. Use a
high-quality paste wax.
[Read the rest of this entry...]

Leave a Comment

2010 Insight Body Side Molding Installation Instructions

The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.

NOTE:
• Be careful not to damage the body paint finish.
• Body side moldings should only be installed if the ambient air temperature is 15°C (60°F) or above.
• To allow the adhesive to cure, do not wash the vehicle for 24 hours. Please advise the customer.
• These installation instructions show the left body side moldings being installed. The same procedure applies to installing the right body side moldings.

1. Using one alcohol swab, clean the area where the left body side molding will attach.
2. Align the front template to the left front door and attach the template to the door using strips of masking tape.
3. Place the left front body side molding against the template to verify the installation position on the left front door. Remove the body side molding.
4. Peel back approximately 1½ to 2 inches of adhesive backing from each adhesive tape, and tape the ends to the front surface of the body side molding. Remove the small end pieces of the adhesive backing.
5. Align the left front body side molding with the front template, and attach it to the left front door. If the vehicle has door edge film installed, align the end with the door edge film.

Download

Leave a Comment

Advanced Autovations Installation Instructions – 3 Series (E46)

BMW Bluetooth, defined as the creators, sellers and resellers are in no way responsible for any damage or malfunction, which may occur to your car and/or your car’s electrical system by installing this unit. “Never use any electronic device or make any inputs while driving that may distract you from driving safely. Pay attention to traffic laws and road conditions/situations. Safe vehicle operation is the driver’s responsibility. Always wear your safety belt.”
[Read the rest of this entry...]

Leave a Comment

1993-1998 VW Golf III 2.0L 8-valve B&M Short Shift System Instructions

This B&M Short Shift System has been designed to work on most 1993-1998 VW 2.0L 8-valve models. It has been engineered to greatly reduce shift throw and improve shift feel. Check the parts and tools lists at the beginning of these instructions for the supplied parts and the tools required to install your B&M Short Shift System. Installation of the B&M Short Shift System can be accomplished by anyone with minimal mechanical experience.
[Read the rest of this entry...]

Leave a Comment

Installation instructions for Stratmosphere HyperBoost Valve

Bob and I appreciate your purchase of your HyperBoost Valve from Stratmosphere. Please read these instructions prior to installation so that you can enjoy a simple and quick installation of your new HyperBoost valve! –Pete
What’s included with your package:
• One HyperBoost diverter valve
• Two medium sized hose clamps
• One small hose clamp
• One instruction sheet (you are reading it)
[Read the rest of this entry...]

Leave a Comment

INSTRUCTIONS OPEL DISPLAY DRIVER AND STALK ADAPTER

INSTRUCTIONS OPEL DISPLAY DRIVER AND STALK ADAPTERINSTALLATION PRECAUTIONS Choose the mounting location carefully, observing the following – The unit is not subject to temperatures exceeding 55 C (Such as in a car parked in direct sunlight) – The unit is not subject to direct sunlight. – The unit is not near heat sources (such as heaters). – The unit is not exposed to rain or moisture. – The unit is not exposed to excessive dust or dirt. – The unit is not subject to excessive vibration. WARRANTY – This product is covered by a 12month warranty valid from the date of purchase – The adapter and lead will be replaced free of charge if failure is due to a manufacturing defect. – The adapter must have been fitted as per the installation instructions. – The unit must be returned to your supplier for any claim under the terms of this warranty. – This does not affect
[Read the rest of this entry...]

Leave a Comment

Honda Civic Si & Acura RSX Icebox Cold Air Intake Installation Instructions

Thank you for purchasing the Comptech Icebox Cold Air Intake for the 2002–2003 Honda Civic-Si and 2001 – 2003 Acura RSX. All components have been designed and manufactured utilizing the latest in technology and materials. Comptech recommends that you read through these instructions before starting installation and that you use an Acura Factory Shop Manual to supplement these instructions.
All Comptech products are intended to be installed by a professional installer. Always use jackstands to support the vehicle when a car lift is not available. Always work in a clean environment and use the appropriate safety equipment to avoid any potential damage or injuries.
[Read the rest of this entry...]

Leave a Comment

Acura B18 Valve Spring Set Instructions

The COMP Cams® Acura/Honda B-Series VTEC valve spring set (Fig. A) utilizes dual springs on the intake side and a single spring on the exhaust side. Below are the information and diagrams to ensure correct installation.
Installation Instructions:
Dual Intake Spring
Installed Height: 60lbs at 1.375
Open Height: 220 lbs at .875
Coil Bind Height: .815
Spring Rate: 300 lbs per inch
[Read the rest of this entry...]

Leave a Comment

Special Instructions for your SAMSUNG SGH-X480

Troubleshooting Details
Use this section in combination with the oneRoam Service User Guide provided if you are having trouble using your phone.
To change your Network Selection
1. Press

.
2. Scroll to “Network Services” press

Leave a Comment