Free PDF Manual Guide

The information relating to timing belt replacement intervals is additional to the main purpose of this CD, but is included to provide guidance to garages and for customer advice. Where possible the recommended intervals have been compiled from vehicle manufacturers’ information. In a few instances no recommendation has been made by the manufacturer and the decision to replace the belt must be made from the evidence of a thorough examination of the condition of the existing belt.
[Read the rest of this entry...]

Installation of the charging socket.
Ensure ignition is off and IMA battery switch under the rear cover is in the off position for at least 10 minutes prior to installation. Note the RED switch lock tab has to be removed to allow the IMA battery switch to be moved.
Remove all the IPU compartment cover star drive and 10mm bolts.
Remove the small 8mm black bolt from IMA Main Battery switch area. This is located to the right of the switch when looking in from rear of the vehicle.
[Read the rest of this entry...]

Honda’s seventh generation Civic range has been expanded to include the new Civic Hybrid. The Civic range was last updated in October 2000, and the model line-up was streamlined to include two body styles, sedan and hatch, with two specification levels, GLi and Vi. The Civic Hybrid is available in sedan only, and is similar in specification to the GLi sedan. The recommended retail price is $29,990. The conventionally powered 1.7 litre Honda Civic GLi Automatic retails for $26,950.
[Read the rest of this entry...]

This Service Light & Airbag Reset Tool is an essential tool for resetting of oil service light, service warning light, service mileage, service intervals and airbag on European made vehicles like AUDI, BMW, CITROEN, M. BENZ,MINI, SAAB, SEAT, SKODA,VOLKSWAGEN, VOLVO, etc. It is light, compact and very convenient without using the OEM Scanner to do the job. Once hooked up to the vehicle Data Link Connector (DLC), it can perform the following functions:
[Read the rest of this entry...]

This Service Light & Airbag Reset Tool is an essential tool for resetting of oil service light, service warning light, service mileage, service intervals and airbag on European made vehicles like AUDI, BMW, CITROEN, M. BENZ,MINI, SAAB, SEAT, SKODA,VOLKSWAGEN, VOLVO, etc. It is light, compact and very convenient without using the OEM Scanner to do the job. Once hooked up to the vehicle Data Link Connector (DLC), it can perform the following functions: Reset of Oil Service Light Reset of Service Warning Light Setting of Oil Service Mileage Setting of Service Mileage Interval Setting of 1st Inspection Service Interval Setting of 2nd Inspection Service Interval Reset of Airbag
[Read the rest of this entry...]

Whether you buy or lease a Honda vehicle, Honda Financial Services can assist you with the process. Please ask your dealer which lease or purchase plan best suits your needs. Want your own look? Ask your dealer about Honda Genuine Accessories.They’re designed, engineered and tested to meet the same exacting standards as your new vehicle – and a high-quality way to make your new Honda a reflection of your one-of-a-kind personality.
[Read the rest of this entry...]

Recently I purchased a new Honda CIVIC Hybrid. My other vehicle is a 1994 S10 Electricar pick-up truck that hadn’t been on the road for over 2 years when I got it and now I drive it every week. Why would an EAA EV driver purchase this kind of car? How is it compatible with electric vehicles?
[Read the rest of this entry...]

This service and diagnostic tool is required to monitor backpressure information stored on the Donaldson filter monitor. It is also required to reset the ‘backpressure high limit’ light (red lamp).
[Read the rest of this entry...]

The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.

NOTE:
• Be careful not to damage the body paint finish.
• Body side moldings should only be installed if the ambient air temperature is 15°C (60°F) or above.
• To allow the adhesive to cure, do not wash the vehicle for 24 hours. Please advise the customer.
• These installation instructions show the left body side moldings being installed. The same procedure applies to installing the right body side moldings.

1. Using one alcohol swab, clean the area where the left body side molding will attach.
2. Align the front template to the left front door and attach the template to the door using strips of masking tape.
3. Place the left front body side molding against the template to verify the installation position on the left front door. Remove the body side molding.
4. Peel back approximately 1½ to 2 inches of adhesive backing from each adhesive tape, and tape the ends to the front surface of the body side molding. Remove the small end pieces of the adhesive backing.
5. Align the left front body side molding with the front template, and attach it to the left front door. If the vehicle has door edge film installed, align the end with the door edge film.

Download

Öhlins Racing AB cannot be held responsible for any damage to the front fork kit, vehicle or injury to persons, if the instructions for fitting and maintenance are not followed exactly. Similarly, the warranty will become null and void if the instructions are not adhered to. This kit should only be installed by an authorized Öhlins dealer. The installation procedure requires certain tools. Before installing this front fork kit, please check the contents of the kit, listed below. If any part is missing, please contact your Öhlins dealer.
[Read the rest of this entry...]