Free PDF Manual Guide

This Guide is intended to quickly enable the user to access the main features of SportsDo. It is not intended to be a complete reference Guide – for this user’s should refer to the SportsDo User Guide for their handset. We feature 4 main types of manufacturer because there are too many different types of handset to document them all. We have chosen Windows Mobile devices, Sony Ericsson, Motorola and Nokia to document but even within this set you may find slight differences in the menus to those listed between devices. GPS set up
[Read the rest of this entry...]

Thank you for purchasing this Sony Portable Reader System PRS-500. Read through this Quick Start Guide to prepare Sony Reader for use. Once initial preparation is complete, you can transfer content from your computer to Sony Reader to take anywhere you wish.
Read this manual for initial preparation.
• Charge Sony Reader.
• Install CONNECT Reader to your computer.
[Read the rest of this entry...]

How the TPM Tester Works
The Tire Pressure Monitor (TPM) tester is a portable, hand-held diagnostic tool used to diagnose problems and program the vehicle electronic control unit (ECU) for tire pressure monitor systems.

The TPM tester activates tire sensors so you can read the sensor information. It also activates tire sensors to send signals to the ECU for programming sensor information into the ECU for the TPM system.
[Read the rest of this entry...]

The ROM monitor is a small program that allows Micropak to debug other, user programs, in the starter kit boards. These boards are supplied with the TOPAS starter kits. In order to perform debugging you must first program the microcontroller on the board with your program and the accompanying ROM monitor. You can do this by selecting the Program command from the Project menu. This should display the Program dialog box. Before pressing OK to start programming make sure that the Include ROM Monitor option is selected. If this option is disabled, then you have probably not selected a ROM Monitor microcontroller. To do this go to the Project Settings dialog box and select a Processor which contains the words “ROM Monitor”.
[Read the rest of this entry...]

Install the Solmetric SunEye TM Desktop Companion Software from CD-ROM
- Insert the CD-ROM that came with the Solmetric SunEye TM into the CD drive on your Windows Vista, Windows XP, or Windows 2000 desktop computer.
[Read the rest of this entry...]

VIPRE Enterprise (VPE) is an enterprise application that is installed on a server and referred to as the VPE server. The VPE server deploys Agents on to your network workstations. Administrators use the policy-based, centrally-managed Admin Console to manage and remove viruses and a broad range of malware from the network. VPE is also a scalable solution, appropriate for both small and large organizations.
[Read the rest of this entry...]

The Samsung SDP-950DXA/STA provides control of the basic operations on the front panel of the Digital Presenter. Please note that you can also access these features via the Remote Control or the PS/2 Mouse by right-clicking on the mouse button to access the menu. Advanced features are found on both the remote and menu commands via the mouse.
[Read the rest of this entry...]

The REMOTE ENGINE STARTER allows you to start your engine from outside the vehicle. It utilizes
your vehicle’s keyless entry remote, so there is no need to carry around an extra remote. The
REMOTE ENGINE STARTER is operated the same way for vehicles equipped with or without the
Smart Entry / Push Start system; simply push the remote’s LOCK button in a quick, two-step
sequence. In addition, the REMOTE ENGINE STARTER can activate the heater or air conditioner
according to your preset temperature controls, providing you with a comfortable cabin upon
entry. As an added convenience, the REMOTE ENGINE STARTER can also activate the defroster
(when preset) to clear up the windshield during cold weather.
[Read the rest of this entry...]

This guide will walk you through the installation process for the Application Monitor Management Pack for Orion. If you are reinstalling or upgrading from another version see Upgrades and Migrations section in the Orion Administrator’s Guide for specific instructions.
[Read the rest of this entry...]

To Select Contacts
When selecting default contacts, use the navigation key to select Contacts > Options >
Advanced > Default > Contacts, then choose Phone Contacts or SIM Contacts. To add a
contact, select Contacts > New Contact > Add. Enter Name and New Number, then select Add > OK.
[Read the rest of this entry...]