Free PDF Manual Guide

The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.

NOTE:
• Be careful not to damage the body paint finish.
• Body side moldings should only be installed if the ambient air temperature is 15°C (60°F) or above.
• To allow the adhesive to cure, do not wash the vehicle for 24 hours. Please advise the customer.
• These installation instructions show the left body side moldings being installed. The same procedure applies to installing the right body side moldings.

1. Using one alcohol swab, clean the area where the left body side molding will attach.
2. Align the front template to the left front door and attach the template to the door using strips of masking tape.
3. Place the left front body side molding against the template to verify the installation position on the left front door. Remove the body side molding.
4. Peel back approximately 1½ to 2 inches of adhesive backing from each adhesive tape, and tape the ends to the front surface of the body side molding. Remove the small end pieces of the adhesive backing.
5. Align the left front body side molding with the front template, and attach it to the left front door. If the vehicle has door edge film installed, align the end with the door edge film.

Download

The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.”

NOTE:
• Be careful not to damage the body paint finish.
• This trunk spoiler kit should be installed only if the ambient air temperature is 60°F (15°C) or above.
• Wash and wax the area to be covered. Use a
high-quality paste wax.
[Read the rest of this entry...]

Resume Writing and Interviewing Skills C a r e e r P re p a r a t i o n Dear Students, This packet includes important and helpful tips on creating a resume and preparing for an interview. At some point in your life, each of you will have an interview—whether it’s for a part-time position, college, technical school, the military, or full-time employment in your intended career field. Please read through this packet for it will better prepare
[Read the rest of this entry...]

Using PowerPoint is perhaps the easiest way to make a good poster. Most users are familiar with Microsoft Office and can navigate the tools with some confidence. Even easier than making a poster is making a poster that won’t print. What follows are instructions for minimizing the likelihood of an unprintable poster. You will find this process easier if you are familiar with the concepts in the Imaging Essentials guide before beginning making a poster: it.med.harvard.edu/ris and go to Guides & Primers
[Read the rest of this entry...]

Ulead Video Studio 9 is an easy to use video editing software that allows even the novice of movie makers to produce a professional project complete with sound, titles, text, still images, overlays, and transitions. For assisted editing, Video Studio 9 includes a Movie Wizard for automated movie making, a DV-to-DVD Wizard for transferring tapes to disc, and automatic music analysis and soundtrack generation.
[Read the rest of this entry...]

Most 17” wheels will clear the outer diameter of the caliper for a 328mm or 332mm rotor kit. For a 355mm kit, a minimum 18” wheel is typically required, and for a 380mm rotor kit, a minimum 19” wheel is needed. The more critical clearance, however, is the gap between the spokes of the wheel and the face of the caliper. Do not assume that a larger-diameter wheel will automatically clear the face of the caliper.
[Read the rest of this entry...]

Using Telestream’s Flip4Mac XDCAM Component, Final Cut Pro users benefit from a file-based media
workflow. With Flip4Mac XDCAM Component, you can ingest MXF files from Sony XDCAM digital acquisition
systems, your Macintosh, and network servers, directly into and out of Apple’s Final Cut Pro editing software.
Flip4Mac XDCAM Component makes it easy to…
[Read the rest of this entry...]

This guide will take you through setting up a build environment for J2ME in Windows and in writing a few sample applications for the A780 phone. There are some notes at the end if you are on another platform, but we strongly recommend using a Windows environment so that you can make full use of the simulator and debug output.
[Read the rest of this entry...]

BidScreen XL is a Microsoft Excel add-in program that measures items from AutoCad DWG, PDF, TIFF and other file types while working in Excel. Additional calculations on the area, length and count measurements generated with BidScreen are performed through formulas and functions directly in Microsoft Excel. A concise audit trail is provided by automatically storing the drawing with the digitized measurement into any Excel workbook cell and file. In summary, BidScreen allows you to view and measure from many files types while clearly organizing your takeoff in any Microsoft Excel workbook.
[Read the rest of this entry...]

What is PDF format?
Portable Document Format or PDF is a flexible, cross-platform, cross-application file format. Based on the PostScript imaging model, PDF files accurately display and preserve fonts, page layouts, and both vector and bitmap graphics. In addition, PDF files can contain electronic document search and navigation features such as electronic links. Portable document format allows a file to be sent to a digital print workstation to be printed (such as Carleton’s Graphic Services), sent in an email, or posted to a website.
[Read the rest of this entry...]