Free PDF Manual Guide

The purpose of this exercise is to help you learn how to apply a sepia tone to a black & white photograph using Adobe Photoshop. First things first, you may be asking yourself, “What in the heck is Sepia?” Sepia is a warm rich brownish tone that gives photos a nice antique feeling. It is used monochromatically rather than using full color or black and white.
[Read the rest of this entry...]

Installing
- Pull clutch pedal into passenger compartment.
- Insert over-center spring into rear mounting first (arrow B), then operate clutch pedal until the retaining clamp seats on the mounting lug of the clutch pedal (arrow A).
- Take out retaining clamp while bringing clutch pedal to rest position.
[Read the rest of this entry...]

The TLN-867 Tuner & Headphone Monitor combines an A440 reference tone generator, a headphone amplifier, and a beat frequency indicator all in a 1U module. The A440 generator is none other than David Brown’s excellent DJB-A440 Reference Oscillator, a super stable digital A440 tone generator.
[Read the rest of this entry...]

Most 18” wheels will clear the outer diameter of the caliper on a 355mm kit. However, the more critical clearance is the gap between the spokes of the wheel and the face of the caliper. Do not assume that a 19”, 20” or even 24” wheel will clear the face of the caliper. The actual metal-to-metal distance measured from the stock rotor face to the inside of the wheel spokes is 62.25mm for the BMW X5 front kit. StopTech recommends at least 2mm of additional clearance. See the Wheel Fitment Drawing page on the StopTech website for more specific measurements, at www.stoptech.com. Note: Final fitment of the wheel to the caliper is the responsibility of the customer.
[Read the rest of this entry...]

How to determine what type of brake calipers and ABS sytem is fitted. During development of the cruise control for the R1150GS we have been aware that there are two different types of front brake caliper and two different ABS systems fitted to this model, and some bikes without ABS. In order to supply the correct kit for the bike, we need to know what type of front brake calipers your bike has, and what ABS system (if any) the bike has. This is easy to determine by following the instructions below. Identifying the front brake calipers. The earlier models were fitted with Brembo brake calipers.
[Read the rest of this entry...]

NSTALLING THE WHEEL
Fixing the wheel in place
1. Place the wheel on a table or other flat surface.
2. Place the clamp screw (16) in the table clamp (15) and then screw the clamping unit into the hole on the underside of the wheel until firmly fixed in place. Do not turn the screw too tightly, as you risk damaging the clamping unit and/or the table.
[Read the rest of this entry...]

This digital telephone is intended to be connected to a digital extension of a Samsung DCS telephone system. The connection allows voice communication between the central processor unit and the telephone. It is not intended to be connected to any other telephone system or the public telephone network.
Please read the provided user instructions carefully
[Read the rest of this entry...]

This is the third generation product and it is available for all vehicles and works with all head units. With this universal audio interface you can connect your aftermarket head unit to your original steering wheel. You will soon enjoy the convenience of controlling your head unit from the steering wheel.
Notes:
1. The installation for this interface is a professional job, so please go to nearby installation shop for help.
2. Before tearing down the steering wheel, contact the local dealer or the factory first.. For installation with 95% of vehicles, it is very simple and you just need to connect 4 wires.
[Read the rest of this entry...]

Most 17” wheels will clear the outer diameter of the caliper. Wheel weights mounted on the inside of the wheel may need to be repositioned. The more critical clearance is the spokes of the wheel to the outer face of the caliper. Do not assume an 18, 19 or even 20 inch wheel will clear the outer face of the caliper. A minimum distance of 60.81mm, measured from the outer rotor face to the inside face of the wheel spokes. This is the net metal-to-metal measurement. We recommend at least 2mm additional clearance to clear the ST-40 caliper on our big brake kits. Please refer to the Wheel Fitment section of our website to confirm any wheel fitment issues.
[Read the rest of this entry...]

Most 17” wheels will clear the outer diameter of the caliper for a 328mm or 332mm rotor kit. For a 355mm kit, a minimum 18” wheel is typically required, and for a 380mm rotor kit, a minimum 19” wheel is needed. The more critical clearance, however, is the gap between the spokes of the wheel and the face of the caliper. Do not assume that a larger-diameter wheel will automatically clear the face of the caliper.
[Read the rest of this entry...]