Free PDF Manual Guide

BMW Bluetooth, defined as the creators, sellers and resellers are in no way responsible for any damage or malfunction, which may occur to your car and/or your car’s electrical system by installing this unit. “Never use any electronic device or make any inputs while driving that may distract you from driving safely. Pay attention to traffic laws and road conditions/situations. Safe vehicle operation is the driver’s responsibility. Always wear your safety belt.”
[Read the rest of this entry...]

The AFC is adjustable in 500rpm increments and automatically interpolates (averages) between these points. For non-adjustable cam vehicles, the CamFC can be used for its AFC and tachometer features whilst the cam trigger output can be used as an RPM switch for NOS, shiftlight, high boost solenoid etc.
[Read the rest of this entry...]

INSTALLATION PRECAUTIONS Choose the mounting location carefully, observing the following – The unit is not subject to temperatures exceeding 55 C (Such as in a car parked in direct sunlight) – The unit is not subject to direct sunlight. – The unit is not near heat sources (such as heaters). – The unit is not exposed to rain or moisture. – The unit is not exposed to excessive dust or dirt. – The unit is not subject to excessive vibration. WARRANTY – This product is covered by a 12month warranty valid from the date of purchase – The adapter and lead will be replaced free of charge if failure is due to a manufacturing defect. – The adapter must have been fitted as per the installation instructions. – The unit must be returned to your supplier for any claim under the terms of this warranty. – This does not affect
[Read the rest of this entry...]

Thank you for purchasing the Comptech Icebox Cold Air Intake for the 2002–2003 Honda Civic-Si and 2001 – 2003 Acura RSX. All components have been designed and manufactured utilizing the latest in technology and materials. Comptech recommends that you read through these instructions before starting installation and that you use an Acura Factory Shop Manual to supplement these instructions.
All Comptech products are intended to be installed by a professional installer. Always use jackstands to support the vehicle when a car lift is not available. Always work in a clean environment and use the appropriate safety equipment to avoid any potential damage or injuries.
[Read the rest of this entry...]

These instructions are only a guide to proper installation. It is the technicians’ responsibility to confirm all connections are correct, use of the proper factory service manual is recommended. We recommend that only a competent and qualified mechanic perform this installation
1) Disconnect negative terminal of battery.
2) Confirm correct plug, pin # and wire colors on ECU and ESM match the diagram provided. All connections are in one plug, check diagram for your vehicle. If there is any discrepancy between your car and the instructions consult the factory service manual to confirm proper pin locations.
[Read the rest of this entry...]

Thank you for purchasing the Comptech Icebox Intake kit for the Acura TSX. All components have been designed and manufactured utilizing the latest in technology and materials. Please take a moment to read this instruction manual and warranty information page thoroughly before starting any work. Remember to always use jackstands to support the vehicle when a car lift is not available. Always work in a clean environment and use the appropriate safety equipment and tools to avoid any potential damage or injuries. Comptech recommends the use of a Genuine Honda Service Manual to supplement these instructions. All Comptech products are intended to be installed by a professional installer. Many stock parts are reused during installation. Do not damage or discard any pieces during disassembly or installation. We recommend marking any hose or wire before disconnecting to avoid confusion during reassembly.
[Read the rest of this entry...]

Everything is included in this kit to add a rear disc brake to your BBR Perimeter Aluminum Frame kit based motorcycle. If you are adapting this kit to the OEM Honda frame or another aftermarket frame kit, you will need our adapter kit PN 550-HXR-5050. Because installation of this kit is beyond the control of BBR Motorsports, Inc, we cannot accept responsibilty for misuse or improper installation. This kit is intended only for use on off-road motorcycles. These instructions are intended only as a supliment to the proper Honda service manual. If the installation of this product is beyond your technical abilities please refer to qualified service personel.

1. Support bike on stand with rear tire off of ground. Remove seat and body work. Remove rear wheel and brake pedal.
2. Remove shipping bracket from master cylinder.
3. Remove shipping wedge from the caliper.
4. Install master cylinder on frame using supplied 6mm bolts.
5. Install master cylinder reservoir on upper subframe bolt using the supplied bracket and longer bolt.
6. Slide caliper (on mount) onto back of swingarm
7. Stick brake hose mounts onto swingarm. Be sure to clean the swingarm to insure that they stick properly.
8. Install rotor and sprocket on the rear hub. BBR recommends using a thread lock adhesive on all these bolts
9. Install rear wheel. Use care to insure that the rotor slides between the brake pads and the wheel spacers stay in place.
10. Install brake pedal tip in desired location. BBR recommends using a thread lock here also.
11. Unsnap the clevis pin from the bottom of the brake reservoir.
12. Install the brake pedal spring on the top bolt mount.

Download

Special Instructions for Air Connections
1. To cut the tubing correctly an appropriate cutter must be used (not a scissors)
2. When inserting the tubing into the connection it must be pushed in approximately 14mm until a click is heard.
3. To remove the tube, push the flange on the connection and at the same time pull the tube. (No tool is necessary.)
4. ATTENTION, when a tube is removed it is important to trim 14mm from the end before reconnection.
5. IT is advisable that LOCKTITE be used on the threaded fittings.
[Read the rest of this entry...]

This B&M Short Shift System has been designed to work on most 1993-1998 VW 2.0L 8-valve models. It has been engineered to greatly reduce shift throw and improve shift feel. Check the parts and tools lists at the beginning of these instructions for the supplied parts and the tools required to install your B&M Short Shift System. Installation of the B&M Short Shift System can be accomplished by anyone with minimal mechanical experience.
[Read the rest of this entry...]

Bob and I appreciate your purchase of your HyperBoost Valve from Stratmosphere. Please read these instructions prior to installation so that you can enjoy a simple and quick installation of your new HyperBoost valve! –Pete
What’s included with your package:
• One HyperBoost diverter valve
• Two medium sized hose clamps
• One small hose clamp
• One instruction sheet (you are reading it)
[Read the rest of this entry...]